2015 Honda CRV All keys lost

**lwood** · 10th January, 2017, 12:02 AM

Hello Masters
i am trying to program a new Smart Key for 2015 Honda CRV, all keys lost..the issue i have is i can not get ignition on.. I hold start button for 10 min.. Ignition never turn on.. I check fuses. Fuses is good.. Is there another way to make ignition turn on?
i try holding keyless up to button.. I try pressing start twice.. I try holding start button 10mins.

**doctore** · 10th January, 2017, 12:16 AM

bring plus + directly to the lock may help you ,or if the manual push the clutch, or is it some other way

**lwood** · 10th January, 2017, 05:23 AM

its automatic,....im not trying to start CRV.. i want to turn on ignition so i could program new key. via OBD with tool.

**comizelu** · 10th January, 2017, 11:22 AM

Try to push the brake pedal and hold

Inviato dal mio HTC One utilizzando Tapatalk

**doctore** · 10th January, 2017, 11:52 AM

Originally Posted by lwood

its automatic,....im not trying to start CRV.. i want to turn on ignition so i could program new key. via OBD with tool.

and I know that you will not start the car, but you need to contact, I just said to try that or break pedal or direct plus

**lwood** · 10th January, 2017, 06:08 PM

Originally Posted by comizelu

Try to push the brake pedal and hold

Inviato dal mio HTC One utilizzando Tapatalk

Originally Posted by doctore

and I know that you will not start the car, but you need to contact, I just said to try that or break pedal or direct plus

yes i try holding break pedal. no ignition.

**bursuc** · 10th January, 2017, 06:24 PM

fiind ignition fuse and give live 12v

**lwood** · 11th January, 2017, 01:52 AM

Originally Posted by bursuc

fiind ignition fuse and give live 12v

ok.
i will try that tomorrow..

**indienick** · 11th January, 2017, 07:07 PM

Find main ignition fuse for the car and apply 12 volts....

what market?

**obdsystems** · 11th January, 2017, 08:03 PM

Often on smart systems you must do this... power fuse

**lwood** · 13th January, 2017, 08:54 PM

hello i have pictures of diagram for fuse box.. could someone tell me what fuse to add 12v power.. i am scared to burn something..

**Chuckk** · 14th January, 2017, 04:27 AM

looks to be #3 (both IG and IG 2), i could be wrong though

**reks13** · 16th January, 2017, 10:06 AM

Not use fuses, use skp900, it put ingition on in menu and program key

**indienick** · 16th January, 2017, 10:20 PM

Use a fuse in-line with your jumper wire (2.5a or 5a) and just make sure to not apply to airbags or ABS and you are fine. You can do it. Don't be scared. If you do not apply to airbag you really cannot hurt anything.

**lwood** · 17th January, 2017, 12:26 AM

Originally Posted by Chuckk

looks to be #3 (both IG and IG 2), i could be wrong though

i add 12v.. still the same. ignition will not turn on..
i also try disconnecting battery and removing backup fuse. to try and reset system.. that did not work ..