CGDI Mercedes Benz Programmer

[p1et]

Try this mate.....

Thanks a lot but unfortunately this rubbish IR code reader also broke when I unplugged USB when software was working. Every day something got messed up and I still don't have working CGDI software, omg

[K1nd3r]

maybe my problem that i trying to extract pass from motorola based ezs XXX5450708, today ezs nr 2, same number obd method error collecting, platform error collecting, 120 ohm resistance between can exist

[ivandi81]

Здравейте някой знае ли дали можете да замените ezs на W210 и как работи? с cgdimb
Здравейте Някой ли Дали мож EZS на V210? и как работи здрави някои да замен ите ezs на v210? и как работно Здравейте някой знае ли дали можете да замените ezs на v210? и как работи

[88diablo]

I have a 2015 Sprinter W906 that CGDI says the file type is incorrect when I try to load a file read by VVDI prog. Ive read that I can copy and paste to make the filke work but im not sure which part I need to move as it just keeps saying file type incorrect. NOW SOLVED

[niksata90]

I have a 2015 Sprinter W906 that CGDI says the file type is incorrect when I try to load a file read by VVDI prog. Ive read that I can copy and paste to make the filke work but im not sure which part I need to move as it just keeps saying file type incorrect. NOW SOLVED

I read the eis for one Sprinter 2014 year with Xprog
After that try this, open file in Hex editor.
Copy paste lower half, starting where data appears,all the way to the top. Then load IT with cgdi and you will see the passwort.

[niksata90]

Someone know how to read the eis for W169 on bench with CGDI? ( I try with gateway simulator and with obd2 cable but don't work)


I can read the dump with Xprog, but when I load the file in CGDI there don't write keys positions... I need to know which keys are already used.


Thanks

[EduardNN]

Someone know how to read the eis for W169 on bench with CGDI? ( I try with gateway simulator and with obd2 cable but don't work)


I can read the dump with Xprog, but when I load the file in CGDI there don't write keys positions... I need to know which keys are already used.


Thanks

Throw your dump

[barho67]

Someone know how to read the eis for W169 on bench with CGDI? ( I try with gateway simulator and with obd2 cable but don't work)


I can read the dump with Xprog, but when I load the file in CGDI there don't write keys positions... I need to know which keys are already used.


i have same problem,i did make key for w169 last week,i use vvdi prog for dump,and if you dont see key possition you can use SKC,with skc you can see keys possition and after use cgdi to make key

Thanks

i have same problem,i did make key for w169 last week,i use vvdi prog for dump,and if you dont see key possition you can use SKC,with skc you can see keys possition and after use cgdi to make key

[niksata90]

Throw your dump

https://mega.nz/#!DtVQHCoL!Dsccpay5w...LCkfraWbuyyk24

[niksata90]

i have same problem,i did make key for w169 last week,i use vvdi prog for dump,and if you dont see key possition you can use SKC,with skc you can see keys possition and after use cgdi to make key

Thank you!!!


I tried with new option "IR read Eis data"
You can give 12v and gnd on the Eis and after that put the IR key.
With this method you can see which keys are used too, but I don't understand how can I renew the EIS. Do you know how can I do that?

Regards

[EduardNN]

Someone know how to read the eis for W169 on bench with CGDI? ( I try with gateway simulator and with obd2 cable but don't work)


I can read the dump with Xprog, but when I load the file in CGDI there don't write keys positions... I need to know which keys are already used.


Thanks

SKC Simon Key Calculator

[niksata90]

SKC Simon Key Calculator

thank you!
Do you know how can I renew the Eis?
Regards

[EduardNN]

Why do you need this? What do you want from EZS?

[niksata90]

Why do you need this? What do you want from EZS?

I just want to know are this possible for W169, because when the original EZS from the car is damaged i must to renew one other second hand EZS (with the same part number) and after that to save in him the EZS information.


In my situation now i made keys and everything is ok. But when i need to change the eis i must to know how to do that, because i can't read the eis with cgdi mb and I can't renew it.


Regards

[EduardNN]

All manipulations to zero and register EZS are done on the IR channel.