CGDI Mercedes Benz Programmer

[wielandgeorg]

When I try to use the erase password with CGDI to erase 7G TCU I get error message that says erase failed. 2012 S63 AMG 722.931 Do I need to remove the TCU and do it on the bench and not in the car ?

[VitalyR133]

When I try to use the erase password with CGDI to erase 7G TCU I get error message that says erase failed. 2012 S63 AMG 722.931 Do I need to remove the TCU and do it on the bench and not in the car ?

I saw on YouTube ECU reset process with CGDI, there was fault to reset several times. And he just read, try to reset, read again. And after 6-7 time fault occured after read ECU was renewed. So maybe you should try to do it several times.
I was reading 7g at Friday, got an erase password, but I didn't try to reset. Cause I have another job to do on it. But when I come back to work I will do what I need and try to reset TCU. I just need some time to get healthy.

Отправлено с моего SM-N975F через Tapatalk

[kristikapa]

When I try to use the erase password with CGDI to erase 7G TCU I get error message that says erase failed. 2012 S63 AMG 722.931 Do I need to remove the TCU and do it on the bench and not in the car ?

You nned to connect in the gearbox plug not by obd

Sometimes says failed to erase but if you read again you will see it's been done

[barho67]

i can not make emulator for w204 esl, cgdi make dump and pass its ok but when i try to write dump to emulator(mk3) its says error check conection,but conection its 100% its can read emu but can not write, i did see video on youtube he make the same thing what i did with same emu,but for me its not working,i think its emu problem? https://www.youtube.com/watch?v=56UkDsPWs2k&t=2s

problem was not mk3 emulator,because i buy vvdi emu and cgdi say the same error : "write error" BUT it working,mk3 emu and vvdi emu start the car,o,lie cggi says error write but he did write it! now car start with booth emu)

[abdulrauf]

please help me with erase pass for 2 ecu reset . this is the special key - D7 5F F2 FD C0 57 41 B0 , 49 3B 94 9B 88 B1 B5 4F .
Thanks

[jonny r]

please help me with erase pass for 2 ecu reset . this is the special key - D7 5F F2 FD C0 57 41 B0 , 49 3B 94 9B 88 B1 B5 4F .
Thanks

Hello,

It is interesting that your CGDI Tool has such poor results when trying to find Erase Pass ...

Here are your 2 Erase Passwords:

abdulrauf.jpg

abdulrauf (2).jpg

Regards
Jonny

[abdulrauf]

Hello,

It is interesting that your CGDI Tool has such poor results when trying to find Erase Pass ...

Here are your 2 Erase Passwords:

abdulrauf.jpg

abdulrauf (2).jpg

Regards
Jonny

THANKS IT ALL WORK FINE.

[VitalyR133]

TCU 722.9 reset ok. Did 2 TCU's: VGS2 and VGS3.


Отправлено с моего SM-N975F через Tapatalk

[jarekkowalczyk]

Hello Friends, what is:
key flag byte ?

[ILHAM013]

Hello Does anyone use these cables to work on the table?
https://aliexpress.ru/item/330521949...c00NGsgaQ&mp=1

can you know good advise please

[wbart]

Hello Does anyone use these cables to work on the table?
https://aliexpress.ru/item/330521949...c00NGsgaQ&mp=1

can you know good advise please

Wysłane z mojego SM-G390F przy użyciu Tapatalka

[ziko]

Need to order cgdi mb, is it http://www.cgdishop.com ok?
Tnx

[chaoui05]

Hi,
who can tell me what this feature is for?
Thks.

[dusichek2012]

This feature activate your key, it will reduce key used times field for one point. Theoretically central locking on this key should work immediately, without insering the key into eis. But I'm not completely sure.

Отправлено с моего Redmi 3S через Tapatalk

[alkazav]

Need to order cgdi mb, is it http://www.cgdishop.com ok?

yes, i bought from them