CGDI Mercedes Benz Programmer

**figani** · 11th May, 2020, 09:08 PM

I have bought 10 keys, from cg100procar...
No keysless keys...

Normally keys...
8 new in trash, sometimes they work and sometimes not...

2 are OK...

I opened them KYDZ stays on board...

I have never seen bigger sh....t then this from cg100procar...

To send it back was to expensive...
Never ever again nothing from this cr...p site and or seller...

**Alpaholic** · 11th May, 2020, 09:56 PM

I bought 30 xhorse keys, they work! without updated diode. Maybe because they have transparent plastic on top. but i cut the "fre" resistor from the pcb.

IMG_4786.JPG

**Msmax** · 11th May, 2020, 10:23 PM

Then those are NOT CGDI keys. CGDI keys are marked CG on back side.

**Msmax** · 11th May, 2020, 10:26 PM

Diode upgrade is mostly for the keyless go keys. Other keys do not have problems except if you have lousy shell with lousy lens in some China produced keys.

I replaced the shell of a original MB damaged key and the car did not work with this key. Removed the lens in front and all was ok... so I have to find better quality shells.

**figani** · 12th May, 2020, 07:05 AM

Originally Posted by Msmax

Then those are NOT CGDI keys. CGDI keys are marked CG on back side.

so they sell on thier homepage kydz keys...

you think they are CHEATER....?

**autoTkey** · 12th May, 2020, 07:32 AM

When you look at the pictures on CGDI website you can see the PCB in details and it must be the same when you receive it.

KYDZ make many good quality keys but their BENZ keys are not among them. KYDZ Benz keys are not working. Even if they program OK at first after some time they get erased - do not use!

**kuzia1** · 13th May, 2020, 04:38 AM

I can not update the error load file error code 25e1

**figani** · 13th May, 2020, 06:32 AM

Originally Posted by autoTkey

When you look at the pictures on CGDI website you can see the PCB in details and it must be the same when you receive it.

KYDZ make many good quality keys but their BENZ keys are not among them. KYDZ Benz keys are not working. Even if they program OK at first after some time they get erased - do not use!

Mate, take a better look...

Here for example...
https://de.cg100procar.com/benz-smar...ery-p0097.html

In the first picture in the near of the price pcb printed with CGDi logo...

Scroll down take a look at others pictures...
It's still same key...
Printed with kydz on pcb...

As I wrote SCA..ING company...
And you paid this SCA..ING company...
You can fight with them to get money back...
Or all in trash...

**autoTkey** · 13th May, 2020, 08:09 AM

So this makes things even worse - they officially send you KYDZ keys and they show it to you on the website ...but just a bit lower - on the last picture in the end of the page.
Maybe this website isn't theirs anymore?
Just use Xhorse keys then and it will be alright for most of the time.

EDIT: Yep, this is not the official website. It's some scam seller.
Official website is http://www.cgprogcar.com/ and there is no shop section because they do not sell directly.
Just go to one of the bigger China stores like UOBD2. It should be OK to buy there.

**figani** · 13th May, 2020, 08:14 PM

Originally Posted by autoTkey

So this makes things even worse - they officially send you KYDZ keys and they show it to you on the website ...but just a bit lower - on the last picture in the end of the page.
Maybe this website isn't theirs anymore?
Just use Xhorse keys then and it will be alright for most of the time.

EDIT: Yep, this is not the official website. It's some scam seller.
Official website is http://www.cgprogcar.com/ and there is no shop section because they do not sell directly.
Just go to one of the bigger China stores like UOBD2. It should be OK to buy there.

Just scroll down on both sides to bottom...
Same post address...

Or just write them by WhatsApp...
On both sides a number stays...
It's Lisa/Anna/Mina/Bill...

**p1et** · 16th May, 2020, 10:25 AM

Hello,

E-Class W211 2005 AKL is possible on car with IR adapter? Not sure what EIS type it have (HC12 or ST12) because I just got phone from customer. I wouldn't ask if I had this car closer to me but I have some distance and not sure if it's possible to do this on car or need to remove EIS which is a really pain for me in this model.

**antibisic** · 16th May, 2020, 04:27 PM

it is very easy to remove 5 min and should be st 12

**ASCM** · 18th May, 2020, 11:00 PM

Originally Posted by antibisic

it is very easy to remove 5 min and should be st 12

Which mcu its more easy to read psw
Hc12 or St12 by IR

Sent from my SM-J415F using Tapatalk

**autoTkey** · 19th May, 2020, 01:45 PM

HC12 - may be possible by IR
Both HC and ST are possible by password extraction with 1 or 2 tokens (make it as an AKL job).

**javyb** · 20th May, 2020, 06:00 PM

Is it possible to generate a key for Mercedes sprinter w906 by ezs eeprom file?when I try load ezs file it says incorrect file

Sent from my SM-N960F using Tapatalk

Thread: CGDI Mercedes Benz Programmer

Thread Tools

Display

Bookmarks

Bookmarks

Posting Permissions