wuza (3rd June, 2024)
hi plz i nead calc key for MB ezs w203
thenks
Hi,
file with all keys in attachment...
Pass have been sent to you via PM...
No need to open 2 topics for same thing... one is enogh...
2024 06 2024 W203 DK.rar
mercedes w 210 lost key cannot make I've been dealing with this for 2 hours. I tried it with a faild ac adapter and it's still the same. I think I need to disassemble and do this by reading the processor. Well, there is something like this, the car's old key is version 51, NEC, I tried it with it, but I still couldn't read it, my real question is, can I get the password from the NEC processor?
information sharing
Yes you can get the password from the NEC in the key, but I've had one 210 ever that couldn't be completed by IR and that was due to multiple corrupted key tracks and I didn't want to fill all available slots til I got a working key. If you're going to be doing desoldering anyway I'd recommend desoldering the inner MCU in the EZS and reading that with a programmer. Desolder the through mounts and fold the EZS open and then take off the inner HC05. Orange, Mbprog etc will all read the HC05 easily. Feed the file into CGDI or any other reputable Benz tool and you'll get keys produced. Inner MCU is a backup of the original state so you avoid the corruption you sometimes find in the outer MCU.
richard27 (23rd July, 2024)
hello cdgi I don't have internet, I can't calculate, can someone do the calculation, please?
password and key okey internet succesfull thanks
Last edited by richard27; 27th July, 2024 at 11:28 AM.
information sharing
Glad your problem got solved but for future reference the files generated by CGDI for password recovery are locked to the device used to do the extraction. You cannot pass your files to a friend with a CGDI device to do the job. This is obviously done to encourage you to buy tokens/keep subscription.
richard27 (27th July, 2024)
I didn't know that thanks for this information
information sharing
mercedes w 207 eis I'm trying to read the lost key but no success, I removed the ignition and it says to connect the yellow cable to the elv kline to make it on the bench
I think it is not an old car, it is a 2009 model. ezs a 207 545 01 08 How can I do this? very thanks
I read eis without password and select collect data fail
https://www.youtube.com/watch?v=aI5FeKLMXjA succesfull read %30
Last edited by richard27; 1st August, 2024 at 04:01 PM.
information sharing
https://www.youtube.com/watch?v=aI5FeKLMXjA&t=138s
Check this video. You can also do it on car but it takes over 1 hour to do it on car.
richard27 (3rd August, 2024)
Bookmarks