CGDI Mercedes Benz Programmer

[p1et]

New software go out this week end, small info that i have:

W169 can do AKL and others need wait to know.

Possible in car OBD/IR or need to work on bench?

[lion0304]

Possible in car OBD/IR or need to work on bench?

Should be both case, but i have no further infomation for now.

[lion0304]

New update came out

ECU support type of Engine 271、272、273 read, write and erase

Add AKL for W169

[H.Wessel]

CGDI 2.3.0.0

https://mega.nz/#!0MtzWIwC!ed7lMPHYW...nI-OAnXo_yEhNY

1.Add read, wipe engine computer (ECU) function
2.Add read, wipe gearbox computer (TCU) function
3.Add read, wipe block computer (ISM/DSM/ESM) function
4.Increase support EIS W169 all lost collection
5.Increase support new BE key write function
6.Fixed the problem of the EIS W204 all lost collection error
7.Fixed the problem that part of EIS can not collect data completely when adding key collection

[ioanrokos]

Hi..
TRied to read 271 engine ecu that had on bench (SIM4LKE)
but no succes ..
i used pin 7 for k line.
maybe k line on 16 pin CGDI is another pin

[autocheck]

Can this tool do w221 and GL w169

Sent from my A718 Xplora Plus using Tapatalk

[lion0304]

Hi..
TRied to read 271 engine ecu that had on bench (SIM4LKE)
but no succes ..
i used pin 7 for k line.
maybe k line on 16 pin CGDI is another pin

On EZS k line read with CGDI, i use pin 1 OBD. Pin 7 is Kline for OBD2 standard.

[driiven]

Can this tool do w221 and GL w169

Sent from my A718 Xplora Plus using Tapatalk

Hello friend, I am getting tool shipped to me. Should be here in a few days. I will confirm if tool works on w221 and w169 and within a week or so. Take care

[SKYTON]

link to video please

[SKYTON]

New report from Espana

W204 2010 adding key on bench

Total time about 15mn. Collegue post many small video.

link to video please

[lion0304]

I see working on bench with OBD cable is very unconfortable by the weight and need wiring to ECU or EZS.

So i've made new cable that can work more easier, faster. OBD cable now save when using on car.

[whiskeyman]

now all we need is company to make us nice cable
thanks for share again lion

[lion0304]

now all we need is company to make us nice cable
thanks for share again lion

Some also ask for that, and Anna said 300$ for cables. But no one see any image about.

In reality, i'm sure they have no one to make cables

Cables they use for testing the tool are take out from old car or something like that.

I already bough 5pcs from vvdi, but all are for Can system and so far not enough

I build cables because cannot wait for that, i've made universal to save more time and space stocking.

Just refer to model EZS, ECU pinout.

Test reading my defective lost data W211 CAN

[Manuelgb]

Is this tool better than VVDI MB?
vvdi is more expensive, but is it worth it?

[leson]

Can anyone clear up what happens after 6 months do online passwords ?
How much we have to pay each time after 6 months ?