CGDI Mercedes Benz Programmer

**tech111** · 29th September, 2018, 01:05 PM

I am using vvdi cables and they are working, unless the unit I had has a hardware failure but I already tried the k line for reading the esl of the 204 and it already read it . Could it be the IR key?????

**IchBins** · 29th September, 2018, 06:05 PM

Originally Posted by K1nd3r

this tool can not make keys for w202 w210 w208, with existing Motorola based key can not extract password, with ezs eeprom calculated keys not working

This is not a problem. Read the eis over obd. save the data. then read moto key with programmer, for example i use carprog. load the key dump into cgdi, there you will see the password. add pass to eis dump. I think they get the rest alone.

**darknezz19** · 30th September, 2018, 09:20 PM

If a 2000 s500 or any other Benz has the old all black fob will China chrome fobs work as well?

**p1et** · 30th September, 2018, 11:43 PM

Originally Posted by darknezz19

If a 2000 s500 or any other Benz has the old all black fob will China chrome fobs work as well?

Yes, will work.

**rob h** · 1st October, 2018, 08:15 PM

Still no solution for W906 dump to key calculator.
I tried to calculated these dumps, using V2.7.2.0
Not working,

http://www.digital-kaos.co.uk/forums...06#post3322259

**K1nd3r** · 1st October, 2018, 08:42 PM

tested on w906 2006-2012, works

**rob h** · 1st October, 2018, 08:56 PM

Yes, the old ones work. I like it to work on 2012-2015, like vvdi mb.

Originally Posted by K1nd3r

tested on w906 2006-2012, works

**p1et** · 4th October, 2018, 11:21 AM

Originally Posted by grzyb26

CG-MB BenzMonster V2.7.2.0
(2018.09.20)
1. Fixed the problem that read EIS failed when 209/211 collection with key.
2. Fixed the problom that 209 sync ELV and 169 write ELV display is not clear.
3. Fixed the problom that the K-line EIS is enabled successfully, but the display fails.

http://www.cg100iii.com/benz/BenzMonster_Setup.exe

Someone have other link? This one doesn't work and I cannot find a working one

EDIT. OK, nevermind. I couldnt open the software but I changed USB cable and now is ok, im downloading through device menu

**darknezz19** · 7th October, 2018, 10:28 PM

2007 c230 can it handle all keys lost if we do it on the bench? What all components have to be removed from the car?

**raimi.s** · 8th October, 2018, 10:56 PM

Tested on Sprinter 2016 works good. Just before load file need delete couple lines with winhex

**ray-ray** · 9th October, 2018, 03:53 AM

What lines did you repair? I’m looking into these tool, so every info. Is important.

**grzyb26** · 10th October, 2018, 06:06 PM

w212 2010 all key lost ok

**p1et** · 10th October, 2018, 06:44 PM

I have the tool for almost a year now so I was one of those person who invested this tool without reading many(positive) real customer opinions and later on I gave some such positive opinions here but now I'm being treated worse than new customer who want to buy this tool, this is ridicolous.

Now if you want to buy this tool you can choose a plan: 2 tokens / day and activation for 180 days - re activate 80usd next half year. Or you can choose other plan which is: 1 token / day and no time expire.

As an old customer I cannot change to 1 token / day, I thought they are joking but unfortunately not...

I'm pissed.

**doctore** · 10th October, 2018, 07:02 PM

Originally Posted by p1et

I have the tool for almost a year now so I was one of those person who invested this tool without reading many(positive) real customer opinions and later on I gave some such positive opinions here but now I'm being treated worse than new customer who want to buy this tool, this is ridicolous.

Now if you want to buy this tool you can choose a plan: 2 tokens / day and activation for 180 days - re activate 80usd next half year. Or you can choose other plan which is: 1 token / day and no time expire.

As an old customer I cannot change to 1 token / day, I thought they are joking but unfortunately not...

I'm pissed.

You can always sell it, and buy a new one As an old customer