CGDI Mercedes Benz Programmer

**babeh** · 1st April, 2021, 03:44 AM

Originally Posted by papalos_

I've only done tests on the bench. I haven't tried it in on vehicle. "Check EIS status" shows only mechanical status as ticked during key rotation, car status remains blank.

If you have EIS/ELV test cable or testing platform you can test it on bench.
You are working on bench you should also able to test it on bench, do you ?

**papalos_** · 3rd April, 2021, 03:42 PM

Originally Posted by babeh

If you have EIS/ELV test cable or testing platform you can test it on bench.
You are working on bench you should also able to test it on bench, do you ?

Yes I have cable set and I'm testing EZS-ELV-Key on bench. I don't understand the question.

**babeh** · 6th April, 2021, 10:41 AM

Originally Posted by papalos_

Yes I have cable set and I'm testing EZS-ELV-Key on bench. I don't understand the question.

If you have other ELV or maybe the original working ELV then you can confirm your test cable wired and is working properly.

When checking EIS status and if you not getting 15R tick,
means either the ELV not programmed or not working or not connected properly or other problems.

Maybe I will get that mini ELV later to see how is it.