CGDI Mercedes Benz Programmer

**babeh** · 7th June, 2022, 05:14 AM

Originally Posted by kostin

Anybody have troubles with ELV emulator from CGDI or work alwayes well?

I am using others ELV emulator, working very well.
CGDI ELV emu also works well, but heard that some old batch has problems.

**den5** · 7th June, 2022, 07:20 PM

hi all. does anyone have this adapter? I would like to know the pinout. Thanks

**den5** · 9th June, 2022, 10:46 AM

Friends, no one has this adapter?

**abdulrauf** · 20th June, 2022, 08:45 PM

please i need erase pass for w203 ecu , special key - D0 BD 4C 3F 3B DA 68 9C .

thanks

**ficho** · 22nd June, 2022, 11:03 PM

Originally Posted by abdulrauf

please i need erase pass for w203 ecu , special key - D0 BD 4C 3F 3B DA 68 9C .

thanks

9D126B562D8601C0

**rob h** · 23rd June, 2022, 05:13 PM

Broken device.
The device does not read the key inserted, in the cgdi itself.
I tested the coil signal, from the device. It is ok.
The ir led readers, these have been replaced last year.
And all worked fine.

Until today,
How can i test my device?
Beside the coil test.

Greetings Rob

**bersch8688** · 24th June, 2022, 04:56 AM

Try this

https://youtu.be/uHfa5H_I6Ns

**rob h** · 24th June, 2022, 10:54 PM

CGDI fail.jpg
This would indicated that the ir diodes, in the device failed to work.
I will have a look inside.

Thank you

**EduardNN** · 26th June, 2022, 05:40 AM

Check the soldering of the IR LED or replace it.

**rob h** · 26th June, 2022, 08:11 AM

I took it appart,
Under the usb microsope,

Soldering was fine.
A small hair, it was ennough to stop it from working.

Did the test, and it worked like before.

Thanks guys

**jodge** · 26th June, 2022, 08:50 PM

Originally Posted by rob h

I took it appart,
Under the usb microsope,

Soldering was fine.
A small hair, it was ennough to stop it from working.

Did the test, and it worked like before.

Thanks guys

For me the bright sunlight could be problem too. Obviously it's messing with the IR diodes thus i covering the CGDI

**abdulrauf** · 6th July, 2022, 12:58 AM

thank you very much

Originally Posted by ficho

9D126B562D8601C0

**hesham10** · 18th July, 2022, 01:48 AM

Thanks to babeh for post 2176 ... added a video for that
https://www.youtube.com/watch?v=ErGC...el=heshamessam

**tankist83** · 18th July, 2022, 12:06 PM

Hi!
eis_x204.jpg
Glk 250 cdiX204 (2012). All key lost! I programmed KeylessGo but work as a ordinary key. I used 41 rom, key CGDI Keyless. Does anyone know what the problem is?

**babeh** · 18th July, 2022, 02:31 PM

Originally Posted by tankist83

Hi!
eis_x204.jpg
Glk 250 cdiX204 (2012). All key lost! I programmed KeylessGo but work as a ordinary key. I used 41 rom, key CGDI Keyless. Does anyone know what the problem is?

What keyless key you are using ?
The old type keyless key may not work.

Have you tried lock/unlock door by key ?
If also not work, check key frequency.