OPEL CORSA D

[quikcar]

HI
Ihave opel corsa d z12xep year 2007
HW: 0261208940
SW: 1037381910
VIN nr.: W0L0SDL6874068736
SW ver.: Z12XEP
Spare:
Engine:
HW Ver.:
SW upg.: 41070501



car not start. also a flashing light on the dash
This fault occurs when attempting to start the vehicle with a flat battery

i need pin code from ecu dump

ecu bosch 7.6.2 i read it with kess



thx

[radoslawwiklik]

In your flash i see three codes: 7751, 2175 and 0103. Try maybe work if not you must use smok and read obd. Also read dash(m35080)

[quikcar]

wrong code
can find code in dash dump

[baltazar3]

wrong code
can find code in dash dump

Use CarProg via OBD to read PIN from ME7.6.2

[quikcar]

Use CarProg via OBD to read PIN from ME7.6.2

i try read it but i have this pb

[daniersms]

Post the dump from the dash that is the file I always use to find the pin on the Corsa D

[szengen]

read anyone can, not everyone save, joke,read the counter

[radoslawwiklik]

Use CarProg via OBD to read PIN from ME7.6.2

Carprog is bad programmer for 12xep...

[quikcar]

Post the dump from the dash that is the file I always use to find the pin on the Corsa D

dash opel corsa D

[pawelelectro]

You need to reset and program BCM.

[radoslawwiklik]

Your pin 4813

[daniersms]

Yes 4813

[quikcar]

You need to reset and program BCM.

I can do that with OPCOM ?

[rivalryan]

yes though you must reset BCM IPC and SDM, tech2 aligns IPC and SDM auto, OPCOM will not. Normal procedure is to apply update with SPS then program though a replacement battery should be enough to complete.

[daniersms]

I use OPCOM to do all of that