Hello,
Sorry for my English, but.
Somebody can say me, how can i need conect the MPPS V18 to the PSG16 to read ECU for remap?
the color of wires i need conect, between the MPPS and the wires of near the batery.
Hello,
Sorry for my English, but.
Somebody can say me, how can i need conect the MPPS V18 to the PSG16 to read ECU for remap?
the color of wires i need conect, between the MPPS and the wires of near the batery.
HeXeN (4th May, 2020), osobuque1 (5th November, 2017), raskolnikov1975 (17th November, 2017)
here you go mate made by myself its really easy just find can wires in the loom near the battery they are green and white in black pvc ,good luck mate
I only need to take the black thick wire, cut and connect the MPPS wires?
in the black thick wire the Green wire is CAN H and the White wire is CAN L?
I need cut all the wire, or only doing a small hole in the green and white cables to connect the wires itīs ok?
Last edited by osobuque1; 10th October, 2017 at 05:18 PM.
personally i cut wires without cutting wires i didnt try yet .and yes white and green wires for can
osobuque1 (5th November, 2017)
Finaly i didn’t need cut all the wires, only doing a small hole in the wires to conect the MPPS it’s ok.
somebody can say me, what happened with my readed file?
I think is not all the ECU is readed.
55352863.rar
Iīm trying to read with the MPPS V21, but something is wrong.
thanks
Why you think that is not readed ok ?
prevozsa (14th May, 2020)
We try to tune it, but its missing few maps..
Chiptuning - Diesel / Petrol / Stage1,2,3 / HIGH Petrol Tuning
DSG TUNING
DPF / EGR / TVA / SAI / Lambda
Crackle map ( Launch Control + No lift Shift + Antilag )
File Service
PCMFLASH / BFLASH / AMT BST / AMT MPPS / TGFLASH / BITBOX / EDCSUITEPRO - Genuine USER
what maps missing?
hi,
I get some files remaped from one vectra bertone Y2.2DTR, and PSG16, but I open the files and the maps there arenīt in the same place like in my readed file.
I know isnīt good to write in my car the file from other car.
What can I do to check that file and transform for my car?
osobuque1 (17th November, 2017)
I compare the first map and in the driver wish the range is not the same, in x i have the range since 82 till 8192 and the remaped have since 0 till 10000. Can I cange this parameters?, because when iīm going to change the winols alert me saying "Protected area is being changed the contents of the 0X820A is to be changed, every though this address is not be covered by any checksum áreas.
Can I change, without problems them writing?
may be i can change only the map parameters, but not the memory place in the ecu?
Last edited by osobuque1; 17th November, 2017 at 07:10 PM.
wonder if your problem was not cutting the can wires and you didnt get full read ?
any information provided is for educational/experimental purposes only.
osobuque1 (18th November, 2017)
Bookmarks