Goodnight
I have had the same problems in several a6 blb also have small jerks?
check the screws and toricas of the inectors in my case several were stretched.
Hello friends,
I need help with my Audi A4 2006 2.0TDI BRD 125KW 03G906018AQ, PPD1.3
Car are in workshop for 4 weeks (No power after 3k(no boost), smoke from exhaust like to much fuel, bad starting, bad work on idle.):
Turbo -> OK
Injector were removed and checked->OK
Tandem and Fuel Pumps->OK
Everything Checked, even tried to change ecu. The same.
I have opinion maybe its DPF or EGR-> Worth a try, but i don`t have any error is VCDS.
Maybe somebody can help me with DPF-off and Egr-off and any unnecessary problematic stuff off.
File read through OBD port.
Thanks in advance.
Last edited by HydrogenV12; 18th October, 2017 at 10:40 PM.
Goodnight
I have had the same problems in several a6 blb also have small jerks?
check the screws and toricas of the inectors in my case several were stretched.
New screws fitted after injectors was checked. On stationary tester. :/
Chiptuning - Diesel / Petrol / Stage1,2,3 / HIGH Petrol Tuning
DSG TUNING
DPF / EGR / TVA / SAI / Lambda
Crackle map ( Launch Control + No lift Shift + Antilag )
File Service
PCMFLASH / BFLASH / AMT BST / AMT MPPS / TGFLASH / BITBOX / EDCSUITEPRO - Genuine USER
HydrogenV12 (19th October, 2017)
Please help me!! I need dpf-off for Audi A4 2.0 tdi, 03G906018AQ, PPD1.3.
I did DPF off with DPF Remover but don't work , does not accelerate more than 2800 rpm and i get an error P2563 turbocharger Boost control position sensor circuit . Thanks in advance , please help me!! I have attached both files.
I'm sorry , This is my original file .
Bookmarks