Smart for 2- no start

**CBR_bl** · 22nd October, 2009, 09:14 PM

Hello to all.
In workshop I have one death Smart. 2002 petrol
No diag communication, on display just 3 lines, one above the other, no cranking no gear switching. I suspect bcm is faulty.
So I need wiring diagram to check signals ,if somebody have. Doesn't have it in Star finder.
10X

**eprommazza** · 23rd October, 2009, 07:58 AM

hello
you ask the customer how and 'success?

**proka** · 24th October, 2009, 11:44 PM

trba da kodiras kljuc sa STAR DIJAG

**tim158** · 25th October, 2009, 10:19 PM

Originally Posted by CBR_bl

Hello to all.
In workshop I have one death Smart. 2002 petrol
No diag communication, on display just 3 lines, one above the other, no cranking no gear switching. I suspect bcm is faulty.
So I need wiring diagram to check signals ,if somebody have. Doesn't have it in Star finder.
10X

have you tried the spare key?,,,,,,,,,

i have come across the key opening the door but not starting the car,,, but spare key did.

sorry no wiring diagram

**CBR_bl** · 27th October, 2009, 08:06 AM

Thanks to all.
Those three lines are so called :three lines of death: and indicates problem on shifting gears , so vehicle cant start the engine

**CBR_bl** · 19th November, 2009, 08:17 AM

Again Smart.
Rant a car with 25 Smarts is at my service. Greaaaaaat.

(((((
Any body have wiring diagram or so.
I need it desperate.
Thanks

**wiggyshome** · 19th November, 2009, 10:17 PM

Originally Posted by CBR_bl

Again Smart.
Rant a car with 25 Smarts is at my service. Greaaaaaat.

(((((
Any body have wiring diagram or so.
I need it desperate.
Thanks

hi

i have had a few smarts in ,
They have had water in the ecu passanger side under dash.
also if it is the models with fuse box under passanger seat had water in that.
that can give problems and you dont get any comms or the car starts doing what it wants when it wants

wiggyshome

**wizzkid** · 22nd November, 2009, 11:30 PM

There is another relay box under seat check blue relays(square) one is tranmission relay.check wiring to gear box by intercooler plastics can rub through

**osamaafia** · 25th December, 2010, 10:04 AM

i got new key for this car and i make keyteach in with smart tan calculator and now
i can't carry out control unit assignment for engine control module this car smart WME4540311B039938
and the engine don't start
CAN ANY ONE GENERATE IT PLEASE FOR ME
EMAIL

( NO ADDYS TO BE POSTED !!!!! )

**johnnykayal** · 4th February, 2011, 10:17 AM

HI THERE CAN SOMEBODY HELP ME WITH ASSIGNEMENT FOR SMART WME4540311B021162 THANK U

**wsc** · 4th February, 2011, 10:10 PM

Originally Posted by johnnykayal

HI THERE CAN SOMEBODY HELP ME WITH ASSIGNEMENT FOR SMART WME4540311B021162 THANK U

here you are again
http://www.digital-kaos.co.uk/forums...am-ecu-177637/

**vuno01** · 21st May, 2011, 03:02 AM

just an idea the other day the same happened to me
and it turned out to be a simple thing.
under the car in the gear box there is a plug sometimes that plug gets dirty or wet so just unplug it
clean it and plug again i think problem solved
at least that hapenned to me.
Hope it helps

**garryreed** · 18th June, 2011, 08:29 PM

the three bars can point at any number of things but like already posted it wont start as the car believes its in gear ... have you scanned it ??? i have come across this and and for me it turned out to be the gear position sensor mounted on the gearbox the also suffer from broken wires in the harness.

on this one if i cleared the fault it would then start but with faulty gear pos sensor it reoccurred

Thread: Smart for 2- no start

Thread Tools

Display

Smart for 2- no start

Bookmarks

Bookmarks

Posting Permissions