Activation Autocom Delphi 2014 Release 3- no hex2stuff

[Pietrek]

If you already have the version of Autocom / Delphi on your computer, we must first remove it entirely, otherwise the installation will not work properly .......
Follow these instructions:


Delete the following folder:
Windows XP


C: \ Programs \ Autocom
C: \ Programs \ Delphi
C: \ Documents and Settings \ All Users \ Application Data \ Autocom
C: \ Documents and Settings \ All Users \ Application Data \ Delphi
C: \ Documents and Settings \ ** USER * * \ Application Data \ Autocom
C: \ Documents and Settings \ ** USER ** \ Application Data \ Delphi
C: \ Documents and Settings \ ** USER ** \ Application Data \ Microsoft \ SystemCertificates \ My
C: \ Documents and Settings \ Microsoft \ SystemCertificates \ My
C: \ Documents and Settings \ LocalService \ Application Data \ Microsoft \ SystemCertificates \ My Documents
C: \ Documents and Settings \ NetworkService \ Application Data \ Microsoft \ SystemCertificates \ My Programs


Windows 7 and 8:
C: \ Programs x86 \ Autocom
C: \ Programs x86 \ Delphi
C: \ users \ ** USER ** \ AppData \ Roaming \ Delphi
C: \ users \ ** USER ** \ AppData \ Roaming \ Autocom
C: \ users \ ** USER ** \ AppData \ Roaming \ Microsoft \ SystemCertificates \ My Other
AXIS:
similar folders.
.
Edit scrapbook:
C: \ WINDOWS \ system32 \ drivers \ etc \ hosts
und Lösche:
127.0.0.1 activation.autocom.se
127.0.0.1 activation2.autocom.se
127.0.0.1 updates.autocom.se
.
Run remove the certificate
.
Start CCleaner and delete the registry
.
Restart your computer
.
Install a new version




To prevent updates online: Rename this file


"wyUpdate.exe" according to "wyUpdate.bak" or "wyUpdate1.exe"


Thank you and your reputation when I help you

[Pietrek]

2014.3 Delphi Cars/ Tracks https://mega.nz/#!uBMxEZRC!ZJieprgAP...4OOuNnWhdfuv8A
2014.3 Autocom Cars/ Tracks https://mega.nz/#!6I8xFIiD!hcyRaqaC1...J5Jmt4uarzKGLA
2014.3.2 final https://mega.nz/#!eJVkgaLK!3d6mTa2dD...MHcSvjUx93w_fM

[Pietrek]

Patch
https://mega.nz/#!iZAT3QRa!8BXv6VhBpYInRt3ER5w3yZSauVyEBsj_eLyZuQMgGdk

[LoveKaos]

[QUOTE = Pietrek; 3129304] https://mega.nz/#!iZAT3QRa ! 8BXv6VhBpYInRt3ER5w3yZSauVyEBsj_eLyZuQMgGdk [/ QUOTE]


Thank's dude !

I'm downloading 2.8GO software can u keep me in touch for activation ?

Best regards,

Fabien

[Pietrek]

[QUOTE = Pietrek; 3129304] https://mega.nz/#!iZAT3QRa ! 8BXv6VhBpYInRt3ER5w3yZSauVyEBsj_eLyZuQMgGdk [/ QUOTE]


Thank's dude !


I'm downloading 2.8GO software can u keep me in touch for activation ?

Best regards,

Fabien

Yes :-) Activate, paste here your FileActiwation zip / rar.

Thank you and your reputation when I help you

[LoveKaos]

No problem i'll do it once it's finish.
Is it important to have Autocom or just Delphi should i download both versions ?
Doest windows versions (10 x64bits) works with ?
Thanks for your answer

[Pietrek]

No problem i'll do it once it's finish.
Is it important to have Autocom or just Delphi should i download both versions ?
Doest windows versions (10 x64bits) works with ?
Thanks for your answer

You have the choice of Autocom / Delphi / Cars / Tracks or a special version where everything is :-)
Good luck

[LoveKaos]

Finally installed on my tablet diag computer VirtualBox (7 PRO SP1 x32bits) !!




VirtualBox_DIAG_26_10_2017_18_24_59.jpg

NOW i'am near to enjoy your superb modified DELPHI


I join you the FileActivation.xml

Thanks for your work

PS: For other users don't forget to change patch even if it's version "R3.2" ENJOY !

[Pietrek]

Your activation
If I helped you give thanks and reputation :-)

[LoveKaos]

Perfect but i have problem with my VCI DEVICE she is seen but read as unknown the "ACTIA" driver is istalled so how can i flash it or make it work ?

Thanks for your work bro !

[Pietrek]

You need to install drivers for VCI from the drivers folder (Device manager)

[Pietrek]

If after installation the problem occurs, the VCI is not recognized or only partially...check
1. PC cable not properly connected to the tester.
2. Power cable is not connected to tester
3. Incorrect Com Port selected

1. lookup whether the inserted VCI VCI has been recognized under a Comport - yes - com port select, if not please reinstall drivers. (Control Panel)
2. OBD connector from VCi not connected to the vehicle, no power supply 12V for VCI.
3. Wrong ID at the beginning of the installation: for example. for CDP rather than A-710-479 was a CDP-710-142 for CDP + then input comes the mistake is not recognized.
4. Incorrect serial number for the VCI. Change the VCI serial and HW Key in the installations.xlm make new activation and VCI run fine.
5. USB cable is defective, broken, or cross-section of cable too small, take thicker USB cable.
6. Firmware broken: re-record with Flash loader demonstrator.
7. VCI has polluted or cold solder joints, take the VCI apart and solder / clean.

Message "Communication Error vehicle is not responding"
USB jack soldered incorrectly. 12V not okay. If the VCI has 2 boards then they are not put together correctly..check.
Message: "Unknown Serial Number Please check whether the installed version for their VCI-type is valid"
Incorrect Main.exe copied / installed, patch "Main.exe" copy back into the installation directory


Important for Windows 64-bit versions:
If you have a 64 bit Windows system on the computer then you have after installing the Delphi folder or Autocom in the following directory copying: C: / Program Files (x86) then the program will run without any problems. If this is not done has to when every time you start over again the first configuration screen.
If the Delphi / Autocom folder in the directory C: / Program Files (x86) has been moved then just a new shortcut on the desktop to create and launch.

After installing the error comes:
"Installation of product ducuments failed! The installation will quit"
"dotnetfx 4.0" installed ... With this version definitely takes the above-mentioned error during installation.
"dotnetfx3.5" install and the installation is running.


If I helped you do not forget to thank and reputation :-)

[kotnascher]

Windows 7 32bit reinstalled, your version installed and activated, OBD does not work, only Generic OBD works, license has 5 limitations !!!!! Can you unlock more in my file?

FileActivation.zip

[Pietrek]

Windows 7 32bit reinstalled, your version installed and activated, OBD does not work, only Generic OBD works, license has 5 limitations !!!!! Can you unlock more in my file?

FileActivation.zip

What to install? Delphi / Autocom?
Cars / Trucks? what serial number? 100251?
I can still activate dieselmax and turbocharger.

[kotnascher]

Delphi CARS 100251, very good wenn you can