Audi A6 flap off

[velver]

Hi
please
can you help me out of SWIRL FLAP OFF?
it's damaged and I'm wrong with P1018

Audi A6
3.0
16cp34

[kinketotua]

Hi friend. Here your file

Have a nice day

[velver]

I did not understand the meaning of this solution, but thank you

[maajkii]

Hi
please
can you help me out of SWIRL FLAP OFF?
it's damaged and I'm wrong with P1018

Audi A6
3.0
16cp34

flaps off, test and report.
pass pm.

[velver]

flaps off, test and report.
pass pm.

it is known that the solution from ADS REMOVER for FLAPS 16cp34 does not work

[flashtech]

Solution for flaps off is easy.
Did You tried at least one of those files that maajkii and kinketotua sent You?

[maajkii]

it is known that the solution from ADS REMOVER for FLAPS 16cp34 does not work

here is file with manual solution winols..
not your ecu but you can do it like on this one, im shure it working..

no password..
if someone like it, use magic buttons..

[velver]

Solution for flaps off is easy.
Did You tried at least one of those files that maajkii and kinketotua sent You?

yes i tried all
but the flaps are still moving
I wanted a solution to keep the flaps open

[velver]

this solution is most suitable ... probably, perhaps

no pass

[kinketotua]

but you try my solution ???

[velver]

but you try my solution ???

yes
but the flaps move like in org.files .... the difference can only be seen in DTC off = P1018,04119,04120

so I'm writing that I do not understand your solution, except DTC off

[johak]

your swirl off file

[velver]

your swirl off file

well thank you
this I did as the first thing .... (my post higher #9) = flaps always open to 50% ....
failure of this solution = after switching on the FLUID, the flaps are set ... but the fault stops and the flap stops in any position = 30%, 65%, 80%, etc.
means not always stop and required 50% ...