Passat 1.6 CAYC engine DPF and EGR off

**Jashmine1983** · 26th October, 2017, 11:13 AM

Hi to all!
Can somebody tell is is good or bad egr and dpf off on this file?
If is good pleaee help with cecksum.
Thanks!

ECU info:
HW: CAYC
SW: 03L906023GL
SW upg.: 03L906023GL 5810
Installation: 1,6l R4 CR td

**eculevel** · 26th October, 2017, 11:31 AM

dpf+egr+speedlimiter no chks.. what tool you use? kess and v54 correct chks in writing

**negative2323** · 26th October, 2017, 11:31 AM

Here is your file... In arch is working soluion and your with corredct chk.
pass in pm..

**Jashmine1983** · 28th October, 2017, 08:14 PM

Originally Posted by negative2323

Here is your file... In arch is working soluion and your with corredct chk.
pass in pm..

Thanks!
But your file does not work well...at 2000 RPM the car stalls and smokes....
Before the writing with your file the car worked well.
With the original file works well also.

**smirnoff_rules** · 28th October, 2017, 08:57 PM

ads 2017 works on this ecu

**Jashmine1983** · 29th October, 2017, 07:30 AM

Originally Posted by smirnoff_rules

ads 2017 works on this ecu

The file from the first post is made with dpf and egr ads software.
The car has manual transmission.
Some people said that are bad.

**Jashmine1983** · 29th October, 2017, 01:05 PM

Can somebody tell if the file from first post is good or not?

**aem** · 29th October, 2017, 01:33 PM

Originally Posted by smirnoff_rules

ads 2017 works on this ecu

not work.after some km you gonna have car back with glow plug on and limp.
and if you check dtc table more then half is deleted with that shit software

**Jashmine1983** · 29th October, 2017, 02:17 PM

Understood...can somebody help with a good solution?

**Jashmine1983** · 31st October, 2017, 05:42 AM

eculevel

solution worked good after SHOOT reset.

Ads 2017 not works on this ecu. The fuel pump is not activated on car. Used the ads 2017 egr solution, then DPF solution, not the one with both on same time.