installing U-Boot 1.3.3

[jamie-warez]

Hi all

I am trying to update my ipbox 9000 hd

it has U-Boot U-Boot 1.3.1 on it
i am trying to put U-Boot 1.3.3 for ntsc support

I have tried with power plus > arrow but i get serial upgrade instead of usb upgrade i am using flashtools latest.

i have also used my usb stick with the up allow way but after installing when i check my u-boot version it still says its U-Boot 1.3.1

[aftermath]

read through here http://www.digital-kaos.co.uk/forums...-9000hd-11407/
scroll down to where it says install u-boot 1.3.3

[catseye]

Just hold your finger on ok & power button m8 whilst machine is in standby mode

Then press & hold power button only

1st booting message appears then a few seconds later usb upgrade should appear

Also if i remember right with mine even after installing uboot 1.33 with flash tools its still read as uboot 1.31 & i was advised this is normal

Cheers

Hi all

I am trying to update my ipbox 9000 hd

it has U-Boot U-Boot 1.3.1 on it
i am trying to put U-Boot 1.3.3 for ntsc support

I have tried with power plus > arrow but i get serial upgrade instead of usb upgrade i am using flashtools latest.

i have also used my usb stick with the up allow way but after installing when i check my u-boot version it still says its U-Boot 1.3.1

[aftermath]

Also if i remember right with mine even after installing uboot 1.33 with flash tools its still read as uboot 1.31 & i was advised this is normal

Cheers

Yeh i meant to post that part this morning but been installing windows7 and forgot

[jamie-warez]

Got usb upgrade now! this way thanks for this post.
Funny that in all manuals it says to use power with >
installed u-boot 1.3.3 no problems this time..
not tested ntsc yet and i ain't moving Tuesday.
Looking forward to playing with it at my home in he us.


thanks for the help.

Just hold your finger on ok & power button m8 whilst machine is in standby mode
Then press & hold power button only

1st booting message appears then a few seconds later usb upgrade should appear

Also if i remember right with mine even after installing uboot 1.33 with flash tools its still read as uboot 1.31 & i was advised this is normal

Cheers