BMW step by step

[Fallen]

Your asking a lot Gwee.

Ever wonder why you can charge $500 to make keys to an e46 but milage correction is less than half that?

Your a smart bloke, buy a few used ews modules and I'm sure you will work it out.

[Fallen]

Xprog m and ak90 and your set

[fadhle]

I understand that ews3 is easy, ews1 and 2 are little tricky and ews4 i will need the soldering point using xprog m.

Anyone has the soldering point daigram to share please.

I think this may help,king regards

[AMINGHROUZ]

hi mate
am using ak90 to read ews4 2l86d in circuit and no problems for now
i dont know if any one have errors or corrupt dumps ?

[chameo]

You should contact ABRITES . they can help you !

[chameo]

DK is much better than Abrites

DK is good but can not help you if you do not have the tools in your hands

[digitaltech]

there is 100's of pages how to read a cas1,cas2,cas3, etc.. even recently cas4 elprosys problems. I'm all for helping, but lets be serious we won't do it for you. u need | xprog and rosfar and practice |

[bearheroes]

for cas the best tool is tmpro
especially CAS3+
I have tested all and only this can make key to all situations
so you need a good tool for read/write CAS
rosfar(original for me) on table
abrites via obd.
and also fgtech to read ECUs because it is necesarry to have eeprom file to TMpro.

[laylairizarry1987]

Besides, these tools for CAS: BMW multi tool via obd/ eeprom data; ak300 key maker read immo data via remove CAS; and Motorola 912/9S12/9S12X Programmer is twice cheap at price.

[bigkey]

hi mate
am using ak90 to read ews4 2l86d in circuit and no problems for now
i dont know if any one have errors or corrupt dumps ?

I know the soldering points on the EWS4 board, but my AK90 cable dont have numbers, so dont know which cable go to which point. Can you help to clarify ? Thanks

[bigkey]

that was a year back how time flies

now no problem

Hi Gwee, can you help me with the color code of which wire go to which point for EWS4 ? Thanks

[AMINGHROUZ]

hello this is it

[AMINGHROUZ]

hello this is it

dont forget to connect pin 5

[ray-ray]

Ews4 soldier points are better on the back of the board, much clear picture & and easy to soldier.

[parlando]

so, what solution you made for ews 1-4 ?
wat to buy for this? will ak90 inaf?