Rangerover evoque KVM programming

[sdnatlst]

With londsor SDD, how does it tell you if KVM is locked before trying to add new key?

I want to buy this tool but wondering first, if it tells you to not touch the car via OBD or not first?

also, what are people success rate with 2010-2015 LAND ROVER/ JAGUAR KVM being locked, is it 50/50 ?

[Locker]

Presumably you have tried a battery reset?

Sure i did, many times hehe

[jodge]

Sorry for the hijacking

For me the RR is really rare and i'd like to clear this thing.
Can i avoid the whole lockdown stuff when the keys directly written into the RFA?
thx

[HeXeN]

I tried jaguar 2015, kvm locked, cant add obd. londsor didnt inform me. just "programming failed". car start ok.

[sdnatlst]

I tried jaguar 2015, kvm locked, cant add obd. londsor didnt inform me. just "programming failed". car start ok.

interesting, i was informed that any attempt to program with KVM locked would shut down KVM functionality completely

[HeXeN]

nothing happened. I tried with 3 different keys. program fail.
then bought same kvm numbers from evoque and read it for tests with vvdi-prog, it can read as unsecured easily. can add keys to dump.
I can tell you this jaguar was later in dealer, they couldn't add key with dealer tool as well.
not found virgin file for dpla-19h440-ac

[raheem1983]

hi. i did one last week. you will need some tools. cheap or any you can buy. so i had a car with all keys lost. and someone did try to add keys with skp900 and locked kvm. so had to buy a new kvm. and was a waste off money coz i did not use it. not that i couldnt. then i figure it out there was no need. i bought a very cheap tool from china and 4 keys. all cost 160 usd.

the tool was mart tool kvm programmer. cost like 80 usd
i bought 4 keys coz i didnt know what frequency the car had so i bought 2x 315mhz and 2x 433mhz.
opened the kvm and read with xprog. theres some videos on youtube and well explanation on china websites and even pinout for kvm. theu use vvdi prog. but xprog does the same job.

you only need to add keys on kvm locked or not. you can add the 4 keys.

first you add the first key on key number 3. it will generate 2 files, use those 2 files to add other key on key number 4 and continue doing so with other keys. once you have the last key added use generated file to write on kvm. and all you need is to put back kvm and use remote to unlock doors and smart key is working... on videos says mart tool program fk72 kvm. but i did on bj32 kvm for evoque.


i also read the virgin kvm from the virgin kvm that i bought to save a backup.


will share it

[raheem1983]

this virgin kvm works for BJ32 and DPLA


it uses

mcu MC9S12XET256 secure


pass= thanks

[raheem1983]

use my file. is virgin kvm for DPLA-19H440 original and you can use on BJ32 too. they use same mcu and they are same on every aspect

nothing happened. I tried with 3 different keys. program fail.
then bought same kvm numbers from evoque and read it for tests with vvdi-prog, it can read as unsecured easily. can add keys to dump.
I can tell you this jaguar was later in dealer, they couldn't add key with dealer tool as well.
not found virgin file for dpla-19h440-ac

[raheem1983]

but i would advice to use old kvm and use mart tool to add keys even if kvm is locked. mart tool will even show you vin number. just compare it.

[lion0304]

hi. i did one last week. you will need some tools. cheap or any you can buy. so i had a car with all keys lost. and someone did try to add keys with skp900 and locked kvm. so had to buy a new kvm. and was a waste off money coz i did not use it. not that i couldnt. then i figure it out there was no need. i bought a very cheap tool from china and 4 keys. all cost 160 usd.

the tool was mart tool kvm programmer. cost like 80 usd
i bought 4 keys coz i didnt know what frequency the car had so i bought 2x 315mhz and 2x 433mhz.
opened the kvm and read with xprog. theres some videos on youtube and well explanation on china websites and even pinout for kvm. theu use vvdi prog. but xprog does the same job.

you only need to add keys on kvm locked or not. you can add the 4 keys.

first you add the first key on key number 3. it will generate 2 files, use those 2 files to add other key on key number 4 and continue doing so with other keys. once you have the last key added use generated file to write on kvm. and all you need is to put back kvm and use remote to unlock doors and smart key is working... on videos says mart tool program fk72 kvm. but i did on bj32 kvm for evoque.


i also read the virgin kvm from the virgin kvm that i bought to save a backup.


will share it

Hi, could you post the locked dump? i need to check if VVDI2 or CG100 can recognise.

THanks

[jodge]

Hi, could you post the locked dump? i need to check if VVDI2 or CG100 can recognise.

THanks

did you ever succesfully added key(s) to dump with vvdi? It's actually working?
thx

[lion0304]

did you ever succesfully added key(s) to dump with vvdi? It's actually working?
thx

Never use by dumps yet, but see vvdi has this function. That why i ask for dump

[jodge]

Never use by dumps yet, but see vvdi has this function. That why i ask for dump

found it, not working

https://www.digital-kaos.co.uk/forum...=1#post3474606

and

https://www.digital-kaos.co.uk/forum...=1#post3309681

[HeXeN]

I have mart tool as well since it popped out.
If vvdi2 recognize dump, it will work ok.