MB Sprinter 316 CDI Delphi CRD3.20 DPF Off

**Rocknsock** · 9th January, 2018, 02:32 AM

Hello,

I read this ecu with KTag and used Swiftec solution to DPF Off.

First time car starts with no DTC and everything seems to be ok, but every second time I try to start the car, It starts but immediately shuts off with P0601..

Its it a checksum problem or a Swiftec solution problem?

Thanks

**voltechcar** · 9th January, 2018, 09:09 AM

swiftec have total bad solution, all dpf off in MB bosch ecu have terrible

**Rocknsock** · 9th January, 2018, 08:55 PM

Can someone give me a hand?

**voltechcar** · 9th January, 2018, 10:42 PM

here you are

**olds 454** · 10th January, 2018, 01:20 AM

try this works fix

**Rocknsock** · 10th January, 2018, 04:23 PM

It gives me always de same dtc and it doesnt start p0601...
I think its a checksum problem...

Enviado do meu SM-G925F através do Tapatalk

**zweriz** · 10th January, 2018, 05:02 PM

Try with (star)development

**olds 454** · 11th January, 2018, 01:01 AM

how did you Flash?

**Ignasvw** · 11th January, 2018, 09:10 AM

file is bad readed

**Rocknsock** · 11th January, 2018, 02:38 PM

Originally Posted by olds 454

how did you Flash?

Boot with KTag

Enviado do meu SM-G925F através do Tapatalk

**Rocknsock** · 11th January, 2018, 08:20 PM

Originally Posted by Ignasvw

file is bad readed

How come?

Enviado do meu SM-G925F através do Tapatalk

**divagomania** · 19th October, 2018, 11:31 PM

I had same problem. All is fine. For what I understand you need to program it through OBD for checksum to be uptaded in EZS.
Someone correct me if I am wrong.
I know this post is old but hope this helps others.
Resume: flash it with kess through OBD.