Genuine tools including Abritus, Autotuner Master, Bosch Ford vcm2, smok UCDS FULL JTAG FULL pcm flash, IO terminal, UPA, Autel maxicom pro, MTX dpf, dtc, immo edc17 UCDS, and a little well maintained hairy box from china I play inside!
4.94 x100 fgtech kess ktm ktag mpps skp. And still collecting
IMG_1521.JPGIMG_1521.JPG
mine excellent at giving unknown error
I feel sorry for anyone who have to work on FORD..........sell AVDI, buy antidepressants........
Guided fault finding = Feature that many factory scan-tools have and real technician despise it.
ttzag (14th February, 2018), whiskeyman (15th February, 2018), yugo45 (14th February, 2018)
clearly (18th March, 2018), rapidlocksmiths (15th February, 2018), z786 (15th February, 2018)
ford fiesta prox 2014 lost keys today
fail fail fail
absolute junk
probably the worst ford tool out there
done job with other tool
worked for me today on 2017 ford cmax prox key, ID47
DK- The Bogs Dollocks!!!
NEVER SAY IT CANT BE DONE!!
The thanks button works wonders!!
DONT SEND ME PM'S ASKING FOR OTHER MEMBERS WORK OR PASSWORDS
Try unlocking several toyota/lexus smart keys. All say successful BUT are not truly unlocked. Verified with MK3. I even put two of my own personal toyota keys. Hit reset and both say success but they still work on car. So avdi unlock feature is total BS.
Gavra (16th February, 2018)
Worked fine for me
cleared one and relearned it to another car ....
If I Help You Please Rep + Thanks ME
Did the following test on my personal vehicle using original mk3 and avdi.
Both showed that my programmed key was cleared successfully.
mk3.. Went to vehicle and my key was no longer working. I took out chinese programmer and was able to program it back in.
avdi... Walked out to car and found it very strange that remote was working. I tried to open door with prox feature but it didn't work. Unlocked with remote and when I got in car would not start. Key did not program in with chinese programmer.
Very strange. Seems like avdi did a partial unlock. ??? Unless avdi only unlocks keys to be used with it's own programming procedure.
With mk3 unlocked keys, I can use any programmer to program them in as they are fully restored to new.
Last edited by ps80l; 16th February, 2018 at 03:56 AM.
yugo45 (18th February, 2018)
. borrow their code ...
think they need borrow a good lot from vvdi now
Bookmarks