>>>>>NEW AVDI PROBLEMS AND SOLUTIONS ONLY THREAD<<<<<

**gttuning** · 13th May, 2024, 05:00 PM

Passat back on the road

Abrites support super quickly send us repaired files.

Support 5 star on this one.

Sent from my iPhone using Tapatalk

**alkaskad** · 14th May, 2024, 09:37 AM

Was your cluster completely dead? I have a same case; after modification no signs of life on cluster, connected it on lab power source, it pulls only 0,04 Amps. I was considering getting another one, but I saw your post here and sent support request... I hope I will be lucky sam as you...

**gttuning** · 14th May, 2024, 11:07 AM

Originally Posted by alkaskad

Was your cluster completely dead? I have a same case; after modification no signs of life on cluster, connected it on lab power source, it pulls only 0,04 Amps. I was considering getting another one, but I saw your post here and sent support request... I hope I will be lucky sam as you...

Yes dead in the car but i still could conect with programer and read mcu.
Send files to support.
What i think happens programer read files bad and it cant verify it.
And when you write back damaged file this is what you get

Send files to avdi support and they will repair it for you and once you solder to your cluster go striaght to load file. Modify you km and write it back.
You should be fine then

I took all safety measures and my experience with this job not to f...up and still issue.
But i know that this isn't stable read write solution yet. So expect shit to happen. But aslong files can be fixed i dont mind.
Hope your case can be solved.

Support done a great job on this case.

Sent from my iPhone using Tapatalk

**alkaskad** · 15th May, 2024, 07:19 AM

Originally Posted by gttuning

Yes dead in the car but i still could conect with programer and read mcu.
Send files to support.
What i think happens programer read files bad and it cant verify it.
And when you write back damaged file this is what you get

Send files to avdi support and they will repair it for you and once you solder to your cluster go striaght to load file. Modify you km and write it back.
You should be fine then

I took all safety measures and my experience with this job not to f...up and still issue.
But i know that this isn't stable read write solution yet. So expect shit to happen. But aslong files can be fixed i dont mind.
Hope your case can be solved.

Support done a great job on this case.

Sent from my iPhone using Tapatalk

They repaired my file and cluster came back to life! I was convinced that I've messed up something physical and was ready to send this one for repair or buy another one... You have no idea how your post saved my ass! Thanks again!

**gttuning** · 15th May, 2024, 12:04 PM

Originally Posted by alkaskad

They repaired my file and cluster came back to life! I was convinced that I've messed up something physical and was ready to send this one for repair or buy another one... You have no idea how your post saved my ass! Thanks again!

Thats cool.

would you mind send me both file original and repaired ? Just want to see if repair file is fixed in same sector as mine.
My email is
gttuning@yahoo.com

Glad you have it fixed.

Sent from my iPhone using Tapatalk

**sagie** · 18th May, 2024, 08:25 AM

Any chance you could find a original 7935 somewhere. I know they are unreasnobly expensive but a single one would do to rule out it being the transponder or the car.

any idea where i can purchase an original 7935

**qwojtus** · 20th May, 2024, 08:35 AM

Originally Posted by alkaskad

They repaired my file and cluster came back to life! I was convinced that I've messed up something physical and was ready to send this one for repair or buy another one... You have no idea how your post saved my ass! Thanks again!

The same here. MQB VDO D70F7526, after writing with Rh850 prog cluster is dead. In this case manage to have backup from different programmer.

**whiskeyman** · 20th May, 2024, 04:43 PM

Originally Posted by qwojtus

The same here. MQB VDO D70F7526, after writing with Rh850 prog cluster is dead. In this case manage to have backup from different programmer.

sounding a very dangerous tool at the moment

**gttuning** · 20th May, 2024, 05:56 PM

Jci skoda 2018
5E0920981F
D70F3529
Read write ok.
Jobe done successfully.

Sent from my iPhone using Tapatalk

**qwojtus** · 20th May, 2024, 07:31 PM

Originally Posted by whiskeyman

sounding a very dangerous tool at the moment

For making keys you need to READ data only. Writing is required when replace the dash or just need to change component protection or something else.

Abrites should fix the issue which defo exists, rather than keep adding $400 licences in beta stage.

**gttuning** · 21st May, 2024, 07:23 AM

These r not that complicated.
And aslong support can fix the file i dont mind.
But sure this needs fixing as thisbis not user error.
Its programer.

Sent from my iPhone using Tapatalk

**Spiritech** · 21st May, 2024, 10:04 AM

Originally Posted by qwojtus

For making keys you need to READ data only. Writing is required when replace the dash or just need to change component protection or something else.

Abrites should fix the issue which defo exists, rather than keep adding $400 licences in beta stage.

V850/RH850 are an erase to read function with all programmers, the chip is erased to remove security, then read and re-written and re-locked during the 'read' procedure. This is why it takes so long. A dead cluster until fixed files are sent are always a possibility if anything at all goes wrong during the erase/read/write cycle. Hopefully one day they will have automated file recovery for us.

**fred77** · 24th May, 2024, 10:12 PM

Originally Posted by Spiritech

V850/RH850 are an erase to read function with all programmers, the chip is erased to remove security, then read and re-written and re-locked during the 'read' procedure. This is why it takes so long. A dead cluster until fixed files are sent are always a possibility if anything at all goes wrong during the erase/read/write cycle. Hopefully one day they will have automated file recovery for us.

maybe this is why we are waiting so long for multiprog cable so xhorse can fix bugs

**gttuning** · 25th May, 2024, 10:33 AM

Hello abrites.
Please repair this.
Us avdi customers reported this last year if not more.
Reading immo data tp2.0 micronas it frezz at address seen on screen.
I have payed for this function so please repair this.
I have reported this as many other users.
Hope yous get this that we support avdi to be best tool but you fail to repair this function

Sent from my iPhone using Tapatalk

**askkey** · 25th May, 2024, 11:42 AM

Originally Posted by gttuning

Hello abrites.
Please repair this.
Us avdi customers reported this last year if not more.
Reading immo data tp2.0 micronas it frezz at address seen on screen.
I have payed for this function so please repair this.
I have reported this as many other users.
Hope yous get this that we support avdi to be best tool but you fail to repair this function

Sent from my iPhone using Tapatalk

Can confirm. I had the issue on A3 PQ cars for several years now. To be honest, other VAG functions have been acting up quite a bit in the recent couple of years. Especially the functions for older stuff (like windows freezing while reading NEC clusters or unable to read pin on K-line cars) , but usually if a problem arises on Dash immo reading, the function still works on wizard or standard mode or vice versa. But on the 8p Audi, nothing has worked for quite some time.
I think I have brought it up before some time ago but as usual not progress from AVDI side.