>>>>>NEW AVDI PROBLEMS AND SOLUTIONS ONLY THREAD<<<<<

[topclef]

Alekn, please help me. I have a Jaguar E-Pace 2018, RFA J9C3, I bought JL005 and JL006, TA57, TA58 and TA63, but AVDI just tells me wrong key, what's the problem? Need help. I spent a fortune on software and hardware and I can't get the car to work...

AlekN already answered this question

Quick heads up. Our developer found an issue with the JLR keys where the software says "WRONG KEY". This needs to be fixed and a new build is expected for next week. He said Thursday but expect the links next week.
Thanks

[gttuning]

The only problems I have had is when I didn't follow the sequence to connect, otherwise I will be at the office next week to connect an example and if you want show you a video.

Alek there is a problem with ZN59..
After update i had two clusters and it didn't work ..
Had to do old way..eeprom job.
Recently i had Audi A3 miscronas..Tryed ZN60 and faild ..software dosent see that im using ZN60 it thinks im reading by obd..

Sent from my SM-G955F using Tapatalk

[gttuning]

Also treyd new abprog software yesturday to erase M35080 in E90 cluster and didt work..
Clears all lines to FF but two first still with old data..
The classic version worked ok...so bug in software. ..
Abrites really needs a dedicated team to solve bugs on weekly basis...otherwise you will have more experience users that will give up on reporting bugs..and tool will turn it to 50/50 tool..

Sent from my SM-G955F using Tapatalk

[AlekN]

I will get around to testing the ZN059 in the afternoon and tell you guys what I found. I will make a video if I can

[AlekN]

I will get around to testing the ZN059 in the afternoon and tell you guys what I found. I will make a video if I can

* VDO NEC ZN059 BOOT MODE SERVICE MODE TESTED:

https://www.youtube.com/watch?v=EEGsjT1hPJk

Hi Guys, based on the updates on the forum I tested it just now with the A1 cluster I had laying around. Please check and make sure the boot pin is connected before you press instrument CAN and follow these here steps:
*Note: To start working with the adapter, the following connection sequence must be applied:
1. Connect the ZN059/60/61 to the cluster and make sure the cable you have is for the exact cluster.
2. Connect the cable to the AVDI
3. Connect the AVDI to the computer.
4. Power the whole system up using the external power supply and try to read the cluster, then enter service
mode.

[TERMINATOR1000]

Hello
Megane 4 Ph 2 & Arkana OK ( same for Espace 5 Ph2 & Talisman Ph2 ) need ABRITES CAN adapter ( or UCO adapter too Renault ) , 5 minutes job ! safe job !
Need to wait new 2023 cars now

[topclef]

Hello
Megane 4 Ph 2 & Arkana OK ( same for Espace 5 Ph2 & Talisman Ph2 ) need ABRITES CAN adapter ( or UCO adapter too Renault ) , 5 minutes job ! safe job !
Need to wait new 2023 cars now

you mean , the UCO adapter works with AVDI ?

[TERMINATOR1000]

you mean , the UCO adapter works with AVDI ?

https://remkeys.com/product/adapter-...dware-remkeys/

Hello , yes it's just an plug , for best contact & no damage wire .... ALL RENAULT UPC BCM HFM ... USE same HW .
Personally i use AVDI CB012 universal cable , but if i can buy U.C.O ADAPTER 02 it's better & easy & FOR ALL RENAULT MODELS ...
And if ABRITES can made & selling an UPC direct OBD2 port for users ???

[whiskeyman]

* VDO NEC ZN059 BOOT MODE SERVICE MODE TESTED:

https://www.youtube.com/watch?v=EEGsjT1hPJk

Hi Guys, based on the updates on the forum I tested it just now with the A1 cluster I had laying around. Please check and make sure the boot pin is connected before you press instrument CAN and follow these here steps:
*Note: To start working with the adapter, the following connection sequence must be applied:
1. Connect the ZN059/60/61 to the cluster and make sure the cable you have is for the exact cluster.
2. Connect the cable to the AVDI
3. Connect the AVDI to the computer.
4. Power the whole system up using the external power supply and try to read the cluster, then enter service
mode.

now try other cable on a micronas audi a3 8p cluster
just for a laugh
nec cluster cable work fine for me as well

[AlekN]

now try other cable on a micronas audi a3 8p cluster
just for a laugh
nec cluster cable work fine for me as well

Chips with that, Sir?
I'll check it out, just waiting for Maciek to comment

[gttuning]

Chips with that, Sir?
I'll check it out, just waiting for Maciek to comment

I have A3 cluster laying in garage..
last time i code secondhand cluster had to read micronas flash with smok and do it that way to get immo data.. as ZN60 didnt work..
ZN59 worked for me always until last two clusters..
But i have cluster form t6 and i will try it both over the weekend..
Actually have caddy aswell for timing belt will try it too..
Will see


Sent from my SM-G955F using Tapatalk

[Jimmylamz]

i cant launch toyota module.
my license is in green.
message prompt to install lastest database common but i did installed.
anyone have solution for this?
advi.jpg

[gttuning]

Chips with that, Sir?
I'll check it out, just waiting for Maciek to comment

Will know soon..
2011 akl golf

Sent from my SM-G955F using Tapatalk

[gttuning]

So first attempt no luck procedure as normal..conect all then open VW software.
Message no working key do it by dump..

After it says do you want repeat..i press yes..
Conect the pin press yes and it worked..

So alot of users reporting problem couse it use to work in first shot..

On last job i tryed few times and didn't work for me..

This time worked..




Sent from my SM-G955F using Tapatalk

[gttuning]

A3 blue conector
ZN60
1.conect cluster to avdi.
2.conect avdi to laptop.
3.power up everything.
4.open avdi.
5.go Audi.
6.press CAN instument.

So if i press CAN cluster for the first time it dosent see that cluster !

Press second time it opens screen like in the pic..
Press read immo data and its stuck at reading adress 0x070010

And nothing happens .

Sent from my SM-G955F using Tapatalk