>>>>>NEW AVDI PROBLEMS AND SOLUTIONS ONLY THREAD<<<<<

[nazz2]

Qeso75, i know that mate, i tried to read from CCM, but no comms/info, the car was 2.9 i think.

[Sasika]

Fiesta 2019 1.5 petrol akl (smart key 2467413)
After door opening the alarm active. Have to wait 10min until stop the alarm and hear double horn. After that if I start the key programming, the counter start from 600 sec (again 10min) and the alarm active again. the counter stay at 1 sec and nothing happened. (Just double horn). I tried reset the bcm but the key programming not possible because the counter always stop at "have to wait 1 sec"
Avdi show still 2 keys in the system.
I tried select 2017 smart key and ignition key, 2013 smart key and ignition key without success.
Any idea what can I do?

[autoTkey]

Haven't worked on this car but here are a few things to check:
- did you attach booster when you were working?
- did you try to read and reset all DTC?
- did you check if your AVDI is the latest possible version?
- did you turn your internet ON?
- did you try to remove battery of the car for a few minutes?
- did you select the correct car model and engine specification?

If all answers are YES, then you should contact support.

[Sasika]

- yes
- yes
- yes, latest
- yes, online
- no I didn't.
Today the support connected to the car via TeamViewer but after 1 hour had to give it up. Now the support checking the log file and try found where is the problem.

[whiskeyman]

- yes
- yes
- yes, latest
- yes, online
- no I didn't.
Today the support connected to the car via TeamViewer but after 1 hour had to give it up. Now the support checking the log file and try found where is the problem.

problem with ford software
been that for a long time always been poor on ford

[whiskeyman]

how many here still having the online fuctions not connecting
or the interface not connecting ???

[oficialusis]

how many here still having the online fuctions not connecting
or the interface not connecting ???

I do.
Damn thing won't work with PSA anymore.


Sent from my SM-G986B using Tapatalk

[fred77]

Fiesta 2019 1.5 petrol akl (smart key 2467413)
After door opening the alarm active. Have to wait 10min until stop the alarm and hear double horn. After that if I start the key programming, the counter start from 600 sec (again 10min) and the alarm active again. the counter stay at 1 sec and nothing happened. (Just double horn). I tried reset the bcm but the key programming not possible because the counter always stop at "have to wait 1 sec"
Avdi show still 2 keys in the system.
I tried select 2017 smart key and ignition key, 2013 smart key and ignition key without success.
Any idea what can I do?

Hmmm i use smartpro on these.

but as said few things to check. doors ALL CLOSED ?? Try Ign on even when say off

-----------------------


As for internet versions - yes we all have issues connecting to interface. Try just having AVDI connected intially and reseting PC

Little bad of Abrites

[Sasika]

Hmmm i use smartpro on these.

but as said few things to check. doors ALL CLOSED ?? Try Ign on even when say off

-----------------------


As for internet versions - yes we all have issues connecting to interface. Try just having AVDI connected intially and reseting PC

Little bad of Abrites

I sent the log file to the support and they told me that " This BCM version is currently unsupported"
IMG_20201030_135859__01.jpg

[Weasel3]

For those who are interested.

I heard someone said it was a anniversary.
15 years.
Promotion on the main tool, which includes the Protag and suitcase.
Free shipping. Limit only 150 pieces within this offer.
Pay for the main tool. Get Protag, suitcase and free shipping included.
This one ends 29. this month.

ECU pack offer 4 days left. Maybe about 30% discount. But sure even then, it cost a lot of USD.

[autoTkey]

...
Limit only 150 pieces within this offer.
...

ONLY ?! 150 pcs are a lot for this tool when you know it has been around for so many years - they will sell those with years...

[Bryanlocksmith]

how many here still having the online fuctions not connecting
or the interface not connecting ???

The error that you are receiving is "Connecting to server failed! Check internet connection!" I understand that this can be worrying however in all cases so far, I have noticed that I was using an old version of the software (for example 32.2 or 32.3) that is no longer supported. So be advised that now AVDI support the latest version of the online software and the one before it.
After my experience at the moment, AVDI now supports versions 32.5 and 32.4. After the new update that is scheduled for this week "as I heard", it supports only versions 32.5 and 32.6.


Enjoy the news no more connection errors

[fred77]

Still having terrible issues with unrecognised dash on these 2016/17 British Gas Caddys

Going to have one last try with im608 on 3 of em as seem to read/write details but not pre-code key.


Failing AVDI tech support I might have to buy Zed Full

[gttuning]

how many here still having the online fuctions not connecting
or the interface not connecting ???

I sent my away..and it was replaced...now all working fine..
So if anyone has issues after update your tool is not compatible with new software...
Im surprised Abrites dosent release a statement on this..


Sent from my SM-G955F using Tapatalk

[gttuning]

Who still have problems when conects with interface or when it conects to OBD of car, conection loses or conect for a short time but later loses communication and hardware not found warning, 3 works ruined because in the middle of programming it loses comunication with interface, can any body tell whats happen ? All begins with the last updates, a lot of money invested and cant use it.

Sent your interface to Abrites like i did..
No other way..domt wast time couse you going to loos more money...

Sent from my SM-G955F using Tapatalk