How install renault clip

[cliochris]

Yes, it installed all four drivers.

I did all as described...
first the registry, then installed clip software, then connected the sonde first to the car and then to the usb port and installed all 5 drivers

I had one time the problem that a message appeared telling me something like the firmware update failed.
There i thought it depended on not being connected to the internet.

Can I proceed it manually?

edit: I used a so called corporate edition of win xp, might there be something missing to run correct?

[BeianM]

I don't think there are any problems with you xp version. Try A different usb cable & different port. It will want to install drivers for this new port. The firmware update is done the first time a new version is run & not needing to be connected to ren.net. Try another computer, different car & if still no go then back to the supplier it goes. My clip only ever seen the vin no. the first time it was run & never again. If it is failing to run @ 98% then you should remove the software completely. Manually delete everything before re installing. don't install the same version you did the first time. You could try re-installing the basic drivers first. see below, Have a look back through this thread & I'm sure you will get it running.

[Dquattro]

hi I have windows vista, and have can clip v103. But i can't install because write me it works with XP windows. So what i have to do? change windows to xp?

[Dquattro]

Now i install v103. Now i can use this version only ? I dont have a renault can clip!
If i dont have it works or no?

[alfabit]

Now i install v103. Now i can use this version only ? I dont have a renault can clip!
If i dont have it works or no?

You can`t install without clip. The installation must find the interface ( especially Cypress controller ) for installing drivers and the clip interface MUST be connected to an working native Reno ( with CAN bus I mean ).
And for vista you can download v105, maybe it will work with vista and W7. You find on google v105, but without clip, no chance to install, buy a clip, it` cheaper now, only 350 euros !

[BeianM]

Now i install v103. Now i can use this version only ? I dont have a renault can clip!
If i dont have it works or no?

This software will only work with the can clip so it is of no use to you with any other adapter. When you have one you may be able to run it on vista or 7 by changing the computers identity from visa or 7 to xp. you can do this when installing to a tablet computer. You use tweakxp & you can find it here => http://www.digital-kaos.co.uk/forums...lt-clip-51711/ post 5

[Dquattro]

This software will only work with the can clip so it is of no use to you with any other adaptor. When you have one you may be able to run it on vista or 7 by changing the computers identity from visa or 7 to xp. you can do this when installing to a tablet computer. You use tweakxp & you can find it here => http://www.digital-kaos.co.uk/forums...lt-clip-51711/ post 5

Yes i found this today after my post, hut thanks for your post.
Install is complete on vista. Now i wait Can Clip cloune

[Dquattro]

O that is newest version? v106?
can you post link to download? or best to torrent link...

[Patrian]

O that is newest version? v106?
can you post link to download? or best to torrent link...

Well, i suggesting you to READ the DK and some Sticky's about Garage Section like those:

http://www.digital-kaos.co.uk/forums...68/#post734005

http://www.digital-kaos.co.uk/forums...tml#post738184 (Especially this)

because until now it is obviously you did not made it...

X-Mas Regards!

PS
BTW, Renault (she reporting...) Clip S/W it will work under f*****g Vista or W7 from Version 107 or 108...

[Dmetrio]

Hello my name is Dmetrio, i'm coming from Indonesia, I've installed Renault clip v.105 into the laptop, but the program can not be used because it always ask for activation key, is there anything that can help me to get the activation key or is there another way to get through these stages?

[Patrian]

Hello my name is Dmetrio, i'm coming from Indonesia, I've installed Renault clip v.105 into the laptop, but the program can not be used because it always ask for activation key, is there anything that can help me to get the activation key or is there another way to get through these stages?

About Activation Key that you saying simply:

I M P O S S I B L E!!!

Something other problem you have...

Post 1 Pic with your Problem if you want...

X-Mas Regards!

[BeianM]

Hello my name is Dmetrio, i'm coming from Indonesia, I've installed Renault clip v.105 into the laptop, but the program can not be used because it always ask for activation key, is there anything that can help me to get the activation key or is there another way to get through these stages?

Are you talking about spx registration? Take a look at earlier posts in this thread & you will find how to get around this.

[ojtee]

Are you talking about spx registration? Take a look at earlier posts in this thread & you will find how to get around this.

Possibly the SPX registration must have locked out the program, and he can't access it.

Why don't people read the whole thread instead of asking to be handfed information.....

[Dquattro]

Yes i found this today after my post, hut thanks for your post.
Install is complete on vista. Now i wait Can Clip cloune

I have now clip, but on Vista not working, because not found driver! found but can;t install... Why? i dont now...
And i dont found other versions, can somethink write to my PM for links? very thanks

[tapiru]

I have now clip, but on Vista not working, because not found driver! found but can;t install... Why? i dont now...
And i dont found other versions, can somethink write to my PM for links? very thanks

M8 just try on FileCrop - Search and Download Rapidshare Megaupload and Hotfile Files and you will see how many version you will find but in my opinion you must have xp not wista or 7.
Good luck!!!!!!!!