cannot connect to ABS with clone VCI

[wbart]

But the genuine tool was able to clear the fault codes on ABS a few weeks ago.

Test the abs fuses first

Wysłane z mojego SM-G390F przy użyciu Tapatalka

[jorokop]

Test the abs fuses first

Wysłane z mojego SM-G390F przy użyciu Tapatalka

The fuses are fine. The ABS works fine. The ABS lamp lights up when I turn the key and turns off 3" later. According to the manual that's how it should work. It performs a self test and if everything is ok it turns off.
I think my pcb is not the best board and I should make a few modifications but I don't know what exactly I should do. The relay board is v3 and the main board is v8. I would appreciate some help. Thank you