Need FULL BDM read Mercedes C320 EDC16CP3

[sdtsedat]

I was reading Mercedes C320 CDI EDC16CP3 and when writing mod file, i receive error during flashing, now ecu not responding.
I am searching now FULL bdm file (eeprom, flash, ..)

In attachment obd read file.

ECU ID:

Bosch
EDC16CP3
1037393830

Is it okey to only write full bdm eeprom and flash / mpc micro and car start?
There is no 028 HW number in ecu id..

[vasa]

need only full BDM flash write eeprom is OK but problem you have open ECU . BDM port is up site . IF you try remove board from alucase damage ECU. it is betrer cut window upsite with cutter

to user post under if not damage mercedes ecu you ar tunning master:-)

[sdtsedat]

It is no problem to do BDM, i open 4 or 5 ecu's every day.
But no bricked ecu untill today, so i need only flash micro/MPC/ External flash? No eeprom ?

[sdtsedat]

Okey, CMD Flashtec do recovery and car start.
Better to work with geniune tools...

Kess V2 clone bricked the ECU.

Problem solved,

[AVDigitale]

thant's good mate
galletto v54 is better with mercedes cars ,mpps v16 or v18 ,kess v2 not good better and mpps v12 in thus ecus but need 13.5v and more to be safe for non stoping during flash
genuine first