KD-X2 Transponder and Remote copier

**Locker** · 5th January, 2019, 11:27 PM

Anyone unlocked BMW BDC remotes (Hella V3, V6 and V7) and can confirm it was successful?

**kostin** · 16th January, 2019, 01:18 AM

Ford Transit can not be copied-((

**dimet** · 16th January, 2019, 07:57 PM

Someone try to clone ID40 opel with new version of kd-x2 software?

**autoTkey** · 17th January, 2019, 08:26 AM

Yesterday I noticed the update and right in that very moment walked in a Fiat Sedici owner (which is rebranded Suzuki SX4 with ID40 Opel immo).
Tried a few times - software reads the key for some time then says that I have removed the key and complains it may get corrupted. Of course no one touches the key.
Then one time it gave a success message for decoding and it wrote a new chip (to PCF7935) - but unfortunately the car refused to start with it. Good thing it still starts with the original key, though!

So in short - no, it doesn't work.

P.S. I liked the old interface better!

**Oras** · 17th January, 2019, 08:50 AM

Originally Posted by Locker

Anyone unlocked BMW BDC remotes (Hella V3, V6 and V7) and can confirm it was successful?

Yes,Hella V3 but i am not tested yet on cars...

**dimet** · 18th January, 2019, 06:25 PM

Originally Posted by autoTkey

Yesterday I noticed the update and right in that very moment walked in a Fiat Sedici owner (which is rebranded Suzuki SX4 with ID40 Opel immo).
Tried a few times - software reads the key for some time then says that I have removed the key and complains it may get corrupted. Of course no one touches the key.
Then one time it gave a success message for decoding and it wrote a new chip (to PCF7935) - but unfortunately the car refused to start with it. Good thing it still starts with the original key, though!

So in short - no, it doesn't work.

P.S. I liked the old interface better!

Did you try with new fimware 01.05.02.53

**autoTkey** · 18th January, 2019, 06:53 PM

I can't check now which is the current firmware but at the time of the test - it was all updated to the latest version (FW. included).

**Oras** · 22nd January, 2019, 04:06 PM

Not working unlocking keys Croma,Alfa 159,got error.

**lion0304** · 22nd January, 2019, 10:11 PM

Freelander 2 card PCF7945 renew OK

**comizelu** · 22nd January, 2019, 10:19 PM

Today made a clone on Passat 2009..
Worked very good.once inserted the key into the slot will sniff once in and once out..so for sniff have to insert key 3times.verry pleased..

Sent from my MI MAX 3 using Tapatalk

**BeatsByMe** · 22nd January, 2019, 10:31 PM

Originally Posted by comizelu

Today made a clone on Passat 2009..
Worked very good.once inserted the key into the slot will sniff once in and once out..so for sniff have to insert key 3times.verry pleased..

Sent from my MI MAX 3 using Tapatalk

Where do you sniff it from?And also I have the 433 and 434 Mgh.So I was wondering if there are other types?

**comizelu** · 22nd January, 2019, 10:36 PM

Originally Posted by BeatsByMe

Where do you sniff it from?And also I have the 433 and 434 Mgh.So I was wondering if there are other types?

I kept the antenna underneath the key once inserted in the slot.
Remote 3C0 959 752 BA 434mhz..

Sent from my MI MAX 3 using Tapatalk

**BeatsByMe** · 22nd January, 2019, 11:31 PM

Originally Posted by comizelu

I kept the antenna underneath the key once inserted in the slot.
Remote 3C0 959 752 BA 434mhz..

Sent from my MI MAX 3 using Tapatalk

Yea,same one.Hope to do one,soon

**super jumbe** · 23rd January, 2019, 11:52 AM

Originally Posted by comizelu

Today made a clone on Passat 2009..
Worked very good.once inserted the key into the slot will sniff once in and once out..so for sniff have to insert key 3times.verry pleased..

Sent from my MI MAX 3 using Tapatalk

I had a go this morning did not collect data can some one else try I may be putting antena in the wrong place when sniffing.