KD-X2 Transponder and Remote copier

**p1et** · 8th August, 2019, 07:48 PM

Fck trunk button, it's better to not even use it.

**godfathertre** · 8th August, 2019, 09:01 PM

Key diy worse support
The steal your wallet money they do not care.

**rob h** · 10th August, 2019, 11:35 AM

I tried to copy a id48.
Volvo V70 2002.

During the data collection this message came:
2 groups data needed.
Invalide data

Any guidence, i tried different interval lenghts, still failed

**p1et** · 10th August, 2019, 11:39 AM

You tried with or without extra antenna for collecting data>

**rob h** · 10th August, 2019, 08:10 PM

I used the device itself,
With extra antenna, you mean?

**p1et** · 11th August, 2019, 01:49 PM

KDX-2 data collector

https://www.youtube.com/watch?v=q4RNYo_JVns

**rob h** · 11th August, 2019, 03:37 PM

Allright, this will improve the reading.
I am going to order 1,

Thank you!

**super jumbe** · 11th August, 2019, 03:54 PM

Got one very good for copping ID48 fast.

**dimet** · 13th August, 2019, 11:42 AM

Originally Posted by rob h

failed cloning
Tried 2 Twingo s, both 2002-2007
ID46 remote pcb.
I tried cloning, and got the message, succesfull, but not start.
Using lkp03 transponders.

Have to try this: Place the transponder closer to the ignition antenna.
Or i will create a transponder, using a NB key.
If that fails, i will try to program a transponder by obd.

I have the same problem with fiat ducato 2008 and lkp03.

**foxtec800** · 14th August, 2019, 03:36 PM

just tried astra j 2012 remote generation 3 btn key and boot button sets off alarm and doesnt open boot anyone had this I used nb22 the gm stle remote

**iTeck** · 17th August, 2019, 12:38 PM

Hi i try to clone whit KD-X2 ID 46 Fiat Doblo 2010 (263) and Ford KA 2011 and transponder write ok but car not start , i try 3 transponders no luck , its from the cip or not work for that cars ?

**p1et** · 17th August, 2019, 12:46 PM

Originally Posted by iTeck

Hi i try to clone whit KD-X2 ID 46 Fiat Doblo 2010 (263) and Ford KA 2011 and transponder write ok but car not start , i try 3 transponders no luck , its from the cip or not work for that cars ?

I experienced the same and don't even try cloning ID46 anymore with this tool. I cloned on TRS5000 on chips from same package and all was fine.

**super jumbe** · 21st August, 2019, 12:21 PM

Any one tried to Copy Audi 8E Transponder Chip with KD-X2 Tool was it a success!!!

**p1et** · 21st August, 2019, 01:44 PM

Originally Posted by super jumbe

Any one tried to Copy Audi 8E Transponder Chip with KD-X2 Tool was it a success!!!

Not possible with any tool.

**Manta1600** · 21st August, 2019, 04:14 PM

Originally Posted by iTeck

Hi i try to clone whit KD-X2 ID 46 Fiat Doblo 2010 (263) and Ford KA 2011 and transponder write ok but car not start , i try 3 transponders no luck , its from the cip or not work for that cars ?

The same situation with Ford Focus 2002 - 4D chip - write OK but car doesn't start

then copied with HB - no problem