Here is BDM 100 Update

**exxl** · 12th July, 2010, 07:15 PM

i make you one picture tomorrow of interface.

but no i dont need external power supply

i only need 12v supply to bdm interface .... nothing more....

**Goups** · 13th July, 2010, 07:39 AM

Here is the pictures of my Chinese BDM. I'm sure I need to connect the +12v/GND to the ECU connector to make it work.

It probably miss some parts so the current is not going to the ECU.

**Goups** · 13th July, 2010, 12:40 PM

Pinout for Bosch MED9.1 and MED9.5.1

**antibisic** · 17th July, 2010, 01:11 PM

has somebody bdm connections for simens sid 803?Connection pads in ecu is not the same like EDC 16 and this adapter not pased!Thanks

**eglo** · 19th July, 2010, 01:36 PM

Hi
Don't know if this will help but there is a manual on the site below with pictures of connections to different ecu's.

evc.de/en/download/down_bdmtogo.asp

**Goups** · 20th July, 2010, 12:34 AM

Originally Posted by eglo

Hi
Don't know if this will help but there is a manual on the site below with pictures of connections to different ecu's.

evc.de/en/download/down_bdmtogo.asp

Even if the clone it's called a BDM100, it's not from EVC. The clone is a copy of the BDM made by CMD for DimSport. Now, the newest ones seems more a direct copy of the CMD, it's hard to know.

**rsibiza** · 26th July, 2010, 05:34 PM

Originally Posted by Goups

Even if the clone it's called a BDM100, it's not from EVC. The clone is a copy of the BDM made by CMD for DimSport. Now, the newest ones seems more a direct copy of the CMD, it's hard to know.

But indipending EVC or CMD,the SPI pad on ecu is same for all...it depends from ecu producer,not BDM...so you can use manual from evc,which is really great one even if used an CMD or clone BDM