Here is BDM 100 Update

[donesko]

this: RapidShare: 1-CLICK Web hosting - Easy Filehosting

can you reupload this

[roth18]

OK can just one of you who got the soft or original uploader

Upload this soft again!

[oZZy_tv]

Upload this soft again!

[youk]

https://rapidshare.com/files/422511432/CMD_1255.rar

[Guillaume]

Is anybody has a solution of my problem please ?

Here

I would like to have the Version 1255a or 1255c of the MPC Software. BDM or OBD or both.

I'm looking for a solution to read and write EDC7+UC31 and it's difficult job.

Thank

[MNBM]

Hi!

Is that possible to make it work with winols after update.
If you update bdm 100 to 1255c maybe you can not be able to connect it to winols anymore

this so called "bdm 100" has nothing to do with winols...

[card2diag]

RapidShare: 1-CLICK Web hosting - Easy Filehosting

thanks first.
is it full working with chine clone from ufodiag?
i hove one from chine,i want to try update

[karalada]

Very nice !

Thank you !

[Mezo]

Upload this soft again!

[maximus1980]

can anyone help me, i've the BDM100 and is showing as clone.
Tried the 2x exe files, 2.exe then 1.exe, but with no luck still showing as clone device.

Anyone.

[Goups]

VAG EDC16 ECU Pinout for BDM100 that needs external power supply

You need to hook up 3 pins (don't plug CAN-L, CAN-H and K-Line)

[exxl]

@dod

watch out, not all china clones are the same clone and same connection, you have a clone that connection goes on reversible side.

my clone the connection goes like original bdm the red line on flat is the first pin.

here is a picture

[Goups]

@dod

watch out, not all china clones are the same clone and same connection, you have a clone that connection goes on reversible side.

my clone the connection goes like original bdm the red line on flat is the first pin.

Do you need an external power supply to read/write the Bosch ECU ? Can you send pictures of your interface ?

My interface is reversed too and I think I need an external power supply.

[exxl]

i make you one picture tomorrow of interface.

but no i dont need external power supply

i only need 12v supply to bdm interface .... nothing more....

[Goups]

Here is the pictures of my Chinese BDM. I'm sure I need to connect the +12v/GND to the ECU connector to make it work.

It probably miss some parts so the current is not going to the ECU.