tuned file FOR RENAULT TRAFIC DCI

[SIMCAR2]

Hello

I need a good modif tuned file for RENAULT TRAFIC DCI 80CV

Here original file:

RapidShare: 1-CLICK Web hosting - Easy Filehosting

Thanks

[oldford]

Have you read this topic: http://www.digital-kaos.co.uk/forums...g-files-57969/

[velaneando]

I think than you have to modify your file, because if you put a bad file you can lock your ecu.
If I remember your file have 40kb and is very easy to modify with winols.
Don?t try to modify with ecm because I don?t find the driver.
I?ll hope had help.




Excuse my english is very bad, but I?m spanish.

[rsibiza]

Hello

I need a good modif tuned file for RENAULT TRAFIC DCI 80CV

Here original file:

RapidShare: 1-CLICK Web hosting - Easy Filehosting

Thanks

IF YOU WANT PLAY TUNER,GO BUY FILES,I FIND LOT OF REQUESTS FROM YOU FOR TUNED FILES.

DO YOU BELIEVE IN FREE TUNING,AND ALL BARGAIN FOR YOU?

[RCpower]

IF YOU WANT PLAY TUNER,GO BUY FILES,I FIND LOT OF REQUESTS FROM YOU FOR TUNED FILES.

DO YOU BELIEVE IN FREE TUNING,AND ALL BARGAIN FOR YOU?

That?s right...

[andrassh]

IF YOU WANT PLAY TUNER,GO BUY FILES,I FIND LOT OF REQUESTS FROM YOU FOR TUNED FILES.

DO YOU BELIEVE IN FREE TUNING,AND ALL BARGAIN FOR YOU?

Where to buy professional files?
Thx!

[rsibiza]

Where to buy professional files?
Thx!

Maybee from aproved lokal tuner...having some year of experiance and maybee a rolling road.

[naruto12]

[andrassh]

Maybee from aproved lokal tuner...having some year of experiance and maybee a rolling road.

And what is your advice for buying tools and software? I want to start chiptuning, but I have only upa programmer for airbag reset! The orig. MPPS is ok?
THX!

[milanoffracing]

And what is your advice for buying tools and software? I want to start chiptuning, but I have only upa programmer for airbag reset! The orig. MPPS is ok?
THX!

If you want to make chip tuning one tool is not sufficient. Minimum that you need is a good programmer, Flasher, BDM Tool, Soldering station.

[rsibiza]

And what is your advice for buying tools and software? I want to start chiptuning, but I have only upa programmer for airbag reset! The orig. MPPS is ok?
THX!

milanoff is completely right at 100%.

You need more than just a serial programmer.

MPPS ori is good tool,does not all engines but lot of them,and not too expensive.

You would also need BDM but no chinese one....

And paralel eprom/flash programmer

solderstation with unsolder clamp,is lot better than hot air,and hot air gun...

This should be ok,to start with tuning....but does not give you the knowledge you will need to do it.

[andrassh]

milanoff is completely right at 100%.

You need more than just a serial programmer.

MPPS ori is good tool,does not all engines but lot of them,and not too expensive.

You would also need BDM but no chinese one....

And paralel eprom/flash programmer

solderstation with unsolder clamp,is lot better than hot air,and hot air gun...

This should be ok,to start with tuning....but does not give you the knowledge you will need to do it.

I have a Gordak 952 station.. not so good but is ok for starting! Where can i get a good solder station with clamp?

[rsibiza]

I have a Gordak 952 station.. not so good but is ok for starting! Where can i get a good solder station with clamp?

Good quality is ersa,but not cheap.

If you wanna start something seriously,i can only say my ersa have now 10 years,works fine as the first,if a ceramic heating pipe breaks,i wait just 2 days get new one.

Real happy with that tool.

Vac pump
solder clamp with al needet clamp points(plcc..flash...)
solder point
hot air