Kawasaki ZX10R 2008 - 2010 (I'm turning dumb)

[BigBlock]

Hi.
I don't know what's wrong with this bike's tacho, the encoding system is different than 2005's.
I need to recalibrate a tacho to 27000km and I don't know why but the datas are not as expected when I read them on 93C56.
Here are 2 dumps from 2 different 2008 bikes for example and the mod I tried.

Mileage should be in 0080, 0090, 00A0 and 00B0 lines and it's not.
Can someone help me ?







ZX10R-2008-Original-dump-(70254-km).zip
ZX10R-2008-Original-dump-(Unknown-km).zip
ZX10R-2008-Mod-dump-(27000-km-error).zip

Thanx a lot.

[clusters]

Not read as 16 bit, and if you wrote over the original your eeprom is now corrupt and you need a new dump.

[BigBlock]

Thank you Clusters.
So simple ?
Past models (2004 - 2007) are ok with 8bits so I didn't tried with 16bits.
I'll try and be back

[clusters]

As a rule, you always read dash files in 16 bit.

[BigBlock]

You are the Boss Clusters ! You provided the solution and now it works.
I'll remember always using 16bits now.
By the way, I've spent some hours to look for a tool which could convert 8bits to 16bits without success, and I saw I'm not the only one who did this mistake.

Many thanx and good night.

[ollync]

You are the Boss Clusters ! You provided the solution and now it works.
I'll remember always using 16bits now.
By the way, I've spent some hours to look for a tool which could convert 8bits to 16bits without success, and I saw I'm not the only one who did this mistake.

Many thanx and good night.

All 93cx6(No A or B character at the end) = 8bit or 16bit:


93cx6 16bit = pin 6 is not connected to anything (or is connected to vcc(+5v))
93cx6 8bit = pin 6 is connected to vdd(negative).


All 93cx6A/B


93cx6A = 8bit (and cant be set to 16bit)
93cx6B = 16bit (and cant be set to 8bit)

Taken from another post on DK, not mine, maybe it will help.

[BigBlock]

[.../... Useful words.../...] Taken from another post on DK, not mine, maybe it will help.

Yes Ollync, I've read these rules too when I did more reseach.
Thanx to post it here, it should be useful for others who land on this page.

[eletrica brasil]

Hello! Do you have the file for the zx10 2008? I lost my file. help please
thank you

[jomberykaso]

Hello! Do you have the file for the zx10 2008? I lost my file. help please
thank you

the file you need is posted here in the first post

[eletrica brasil]

yes I found it. in the previous post it is in 8 bits. it does not work either

[eletrica brasil]

file original is 16 bit

[jomberykaso]

Yes. You are right. My mistake. ..sorry

[Mr Blonde]

Hello, I need to correct the mileage from a 2008 zx10r. I will buy a tool to read the eeprom , but meanwhile can you point me to a tool/tutorial to do that? Thank you!

odo.jpg

[Fangia pgmfi]

read 8bit is swap byte = error, you need swap again will ok

[Mr Blonde]

Hello. Need correction for 08 zx10r. Thanks

Now 36***
Need 32860 (or close)

i've read eprom with 2 tools, i don't know whitch one is good. please see atached.