>>>>>>>>>>>>>>>OBDSTAR Device Support (or lack of it to be more accurate)<<<<<<

**hcip** · 27th March, 2022, 04:19 PM

Originally Posted by saslocksmiths

Everything has its place obdstar is a good tool it has got me out of trouble a few times when nothing else work, but for Mercedes it's not good butt its is very good on Asian vehicles I guess it all depends on what you want to use it for and keep in mind that not one tools does everything I have advanced diagnostics I have smart Pro I have sbb I have nanocom I have vvdi key tool Plus I have obdstar I have Avdi original tango tmpro Orange five the list goes on how I wish I could buy one till that did everything it would make so much more room in my vehicle

Nothing is one shot , Big Shot.
all tools have advantage and dis advantage.

Its like a simple that when you buy an air Rifle, you can not shot an elephant......

**joker01** · 28th March, 2022, 08:49 PM

yes yes ..... I know well that a tool is never enough ... I have several tools for engine ecu and mcu programmers but on the keys I'm starting now ... is dropped as updates ......

**rtbdiagnostic** · 29th March, 2022, 06:32 AM

Originally Posted by hcip

Nothing is one shot , Big Shot.
all tools have advantage and dis advantage.

Its like a simple that when you buy an air Rifle, you can not shot an elephant......

Howzit

Need your advice any success with ODO Master or perhaps the OBDProg M500 on the Renaults kwid Clio IV Captur etc on blocking sync with ABS pump
Also on the newer Ford Rangers 2019 onwards with Renesas prcessor any luck via obd with Odo Master perhaps

Your feedback much appreciated

**joroflash** · 8th April, 2022, 06:41 PM

Hi , mates !
Can ObdStar Key Master DP Plus adding key to CAS3++ IstaP from BMW E60 2007 , petrol . Is the downgrade by OBD safe ? I try another option from Eeprom dump from CAS make a starting key , ObdStar programming a new key , but no generate new dump for CAS module ... If anyone has experience with this tool and BMW CAS3+ crypto eeprom , please share , thank you !!

**davorOS** · 21st April, 2022, 08:32 PM

hi
Anyone try new VOLVO update sw for X300dp?
I have 2007 v40 with lost key
I read CEM both motorola MCU as per instruction and can get PIN but when go to V40/FOBIK/24 pin system I'm instructed to turn key to ON after that I can't get comms as Ignition not turned ON

how to get ignition ON when I don't have working key??

**holbi1** · 28th October, 2022, 10:40 AM

Friends what about renault kadjar after 2016 any succes with card programing ?

**vialli** · 28th October, 2022, 04:29 PM

Originally Posted by holbi1

Friends what about renault kadjar after 2016 any succes with card programing ?

I was successful in adding a new Chinese card to a 2019 Kadjar a month ago

**holbi1** · 8th November, 2022, 12:26 PM

Originally Posted by vialli

I was successful in adding a new Chinese card to a 2019 Kadjar a month ago

Viali it was info about risk damadge when you choose read flash ?

**vialli** · 8th November, 2022, 03:25 PM

Yes, you are warned that in order to calculate the security code, the keys will be deleted from the memory.
That's exactly how it is after the flash is read, the car is dead, the key no longer works.
I read the flash a second time and compared them at home, the second one had a small part modified with FF, that is, something was really deleted during the first flash reading.
For dealer key and programming I used the first reading and I was successful

**vialli** · 10th December, 2022, 03:10 PM

Trafic 3 akl.jpg

Today I had a 2015 Trafic 3 with all the keys lost.
I was successful in programming a new key.
I have attached a picture with the warning you get if you take the risk of programming a new key, I apologize for the modest quality of the picture.
My message is that a new key can be made in the AKL situation with this programming tool.
That is if you are brave enough to try.