BMW F30 ISN FEM

**kalibrovich** · 11th July, 2018, 04:52 PM

Hi guys

Can somebody find ISN in FEM and enter it to engine ECU

**drugowaz** · 11th July, 2018, 05:09 PM

You cant get isn from fem from dump. I

**rola1971** · 11th July, 2018, 06:45 PM

Originally Posted by kalibrovich

Hi guys

Can somebody find ISN in FEM and enter it to engine ECU

read fem in table not only eeprom
no posibility find fem isn from eeprom

**mustafabahar** · 11th July, 2018, 07:43 PM

Its in working key and in DME

Verzonden vanaf mijn iPhone met Tapatalk

**kalibrovich** · 12th July, 2018, 06:54 AM

Originally Posted by mustafabahar

Its in working key and in DME

Verzonden vanaf mijn iPhone met Tapatalk

DME is burned
What is a solution? excecpt buying a NEW one?

**mustafabahar** · 12th July, 2018, 07:05 AM

You can post picture of it.
Is it posible too read DME in bootmode than you can clone new one if you can’t read microprocessor or eeprom then you neet order on vin number.

Moes

Verzonden vanaf mijn iPhone met Tapatalk

**rola1971** · 12th July, 2018, 11:38 AM

Originally Posted by kalibrovich

DME is burned
What is a solution? excecpt buying a NEW one?

what tools you have for work in bmw?

**ThiagoArgentino** · 12th July, 2018, 01:29 PM

Originally Posted by kalibrovich

Hi guys

Can somebody find ISN in FEM and enter it to engine ECU

For you to solve the problem, just buy a used DME, read the ISN, leave the FEM virgin, and write the DME ISN used in the FEM, and record new keys ...

**drugowaz** · 12th July, 2018, 02:08 PM

What are you talking about

**kalibrovich** · 12th July, 2018, 06:18 PM

Originally Posted by rola1971

what tools you have for work in bmw?

I have original AVDI... but he can`t do anything

**rola1971** · 12th July, 2018, 06:24 PM

Originally Posted by kalibrovich

I have original AVDI... but he can`t do anything

if you dont have good tools you dont read isn from fem or key
try to talk to guy in skype "GermanCars BMW"
may be he help for you
good luck

**Gavra** · 12th July, 2018, 08:12 PM

Originally Posted by kalibrovich

I have original AVDI... but he can`t do anything

operator error mate .........

**joemajdalani** · 12th July, 2018, 11:59 PM

Originally Posted by kalibrovich

I have original AVDI... but he can`t do anything

Do you have BN013 ?

**qwojtus** · 14th July, 2018, 11:06 AM

Your basic options are:
1.Get new DME
- read ISN
- reset working hours
- change vin (Autohex, BMW EXPLORER)
2. Unlock FEM( many tools)
- write DME ISN
- make new key
3.Reset gearbox 8HP (Autohex, BMW EXPLORER)
- manual gearbox renew ELV
4. Adoption, Coding, Programming ( IstaP, IstaD, Esys and others)

There are more solutions but I doing this way.