Nissan LCN EU

**zivcani2017** · 26th May, 2019, 10:52 AM

Originally Posted by prodan

set your project file ---- options -> project settings -> flash , set your flash base address as I wrote earlier!

and when you load your data choose 0x2A120000 as a start address

I have the same problem.

What iflash base dress?

thanx..

**memish** · 27th May, 2020, 02:06 PM

Hi all,

I have a same problem.I have project for TMS470R1VF689 and i can read the entire chip and safe it.
But when i did changes or when i upload another data file from same chip (TMS470R1VF689) and when i try to program is appears error message - Program (0x0 - 0x5FFFF) does not fit into selected flash sectors.

Can you help me with this problem?
Thanks in advance.
Best Regards,

**memish** · 28th May, 2020, 10:09 AM

Hi all,

The problem is solved for me.

When i upload and try to write the entire chip is appears this error message - does not fit into selected flash sectors.
Because the chip is with 2 ranges -> range1 - 0x0 - 0x1FDF and range2 - 0x2000 - 0x5FFFF (till end)
And my procedure for writing is :
1. I cut the file to 2 pieces - as i described ranges (range1 and range2)
2. And the write 1st range1 and then range2

I use the SEGGER J-flash V5.00 because the newest version don't read and write properly.