MJD8F kess 2.23 via OBD ?

**fzhut** · 6th August, 2018, 08:45 PM

Hi,

Im going to do this car (2010 fiat panda 1.3 mjt 75 DPF). Kess 2.23 have this protocol. Is it safe to read this ecu with EU clone and write via OBD ?

Regards,
Mateusz

**lsdlsd88** · 6th August, 2018, 08:52 PM

as with every clone, theres always a risk. but should be fine

**fzhut** · 6th August, 2018, 09:33 PM

Any people tried ?

**lsdlsd88** · 6th August, 2018, 09:45 PM

Done loads successfully..

**sdtsedat** · 7th August, 2018, 12:44 AM

My friend brick this ecu with kess clone 2.23 v5.017

Geniune tool do this without problem.
Regards from Belgium,

Verstuurd vanaf mijn SM-G955F met Tapatalk

**TuningInside83** · 8th August, 2018, 01:25 PM

MJD8F2 read and written without problems

**dudus8** · 14th October, 2018, 09:10 AM

MPPS can read and write this ECU no problem

Wysłane z mojego SM-G965F przy użyciu Tapatalka

**Panathaole** · 16th October, 2018, 12:31 PM

Originally Posted by dudus8

MPPS can read and write this ECU no problem

Wysłane z mojego SM-G965F przy użyciu Tapatalka

i have true eu mpps v18 clone ... can full read but i think write only eeprom.. not flash...

**huskypt** · 2nd November, 2018, 05:29 PM

Hi fzhut

Can you read and write this ECU with your tool?

Originally Posted by fzhut

Hi,

Im going to do this car (2010 fiat panda 1.3 mjt 75 DPF). Kess 2.23 have this protocol. Is it safe to read this ecu with EU clone and write via OBD ?

Regards,
Mateusz

**tiugrikas** · 2nd November, 2018, 07:21 PM

Originally Posted by huskypt

Hi fzhut

Can you read and write this ECU with your tool?

use mpps v18 works perfect and super fast

**immokill** · 2nd November, 2018, 07:41 PM

I use galleto work fine on 8f2 dont now on 8f3 mate

look here bro

http://www.digital-kaos.co.uk/forums...=1#post3344778

8f2 is tested bu me 8f3 i dont know

**rh03** · 2nd November, 2018, 08:01 PM

mjd8df ok for me with eu mpps v18, eu and genuine mpps have good réputation on marelli ecu

**huskypt** · 3rd November, 2018, 12:19 AM

Today i tested for 8F3 (KESS).... write ok but maybe checksum failed (DTC P060c).... wrote ORI ...

**huskypt** · 3rd November, 2018, 12:22 AM

I tried but without sucess with Galletto.

Originally Posted by immokill

I use galleto work fine on 8f2 dont now on 8f3 mate

look here bro

http://www.digital-kaos.co.uk/forums...=1#post3344778

8f2 is tested bu me 8f3 i dont know

**silan66** · 3rd November, 2018, 03:46 PM

Originally Posted by huskypt

Today i tested for 8F3 (KESS).... write ok but maybe checksum failed (DTC P060c).... wrote ORI ...

did fiat ducato 8f3, crc rules in winols, the recording is over, auto rides. (without editing the checksums of the car, do not start) upload the read file, fix crc and start the machine (kess clone)