Opening for BDM read mercedes EDC16C2 ecu's
Register
Results 1 to 11 of 11
  1. #1
    DK Veteran
    ivanmihov's Avatar
    Join Date
    Nov 2016
    Location
    Bulgaria
    Posts
    495
    Thanks
    116
    Thanked 238 Times in 214 Posts
    Downloads
    23
    Uploads
    0

    Default Opening for BDM read mercedes EDC16C2 ecu's

    i have never tried to read this edc16c2 ecu's,i always do them obd with kess no problems so far,but i read that they are not easy to open like other edc16's is it true ? I will buy one just to try to open it without breaking it

  2. #2
    Senior Member

    Join Date
    May 2017
    Location
    Turkey
    Posts
    296
    Thanks
    5
    Thanked 110 Times in 95 Posts
    Downloads
    2
    Uploads
    0

    Default

    Quote Originally Posted by ivanmihov View Post
    i have never tried to read this edc16c2 ecu's,i always do them obd with kess no problems so far,but i read that they are not easy to open like other edc16's is it true ? I will buy one just to try to open it without breaking it

    Use kess v2. I did a lot of without problem via kess...
    Open the backside of ecu hard. You can may damage ecu.
    Genuine 'WinOLS,MagPro2X17 Master, VagCom-Vcds, Vag Can Pro-Vcp'
    And 'Kess-Ktag' Red Pbc Ecu Clone User.
    Professional Car Remapper And Ecu Calibration Expert From TURKEY

  3. The Following User Says Thank You to ilkertdi For This Useful Post:

    ivanmihov (7th August, 2018)

  4. #3
    DK Veteran
    ivanmihov's Avatar
    Join Date
    Nov 2016
    Location
    Bulgaria
    Posts
    495
    Thanks
    116
    Thanked 238 Times in 214 Posts
    Downloads
    23
    Uploads
    0

    Default

    so my nightmare is real kess froze on 50 %

    my edc16c2 is bricked any pictures or advices how to open and recover this bloody edc16c2

  5. #4
    Senior Member

    Join Date
    May 2017
    Location
    Turkey
    Posts
    296
    Thanks
    5
    Thanked 110 Times in 95 Posts
    Downloads
    2
    Uploads
    0

    Default

    Quote Originally Posted by ivanmihov View Post
    so my nightmare is real kess froze on 50 %

    my edc16c2 is bricked any pictures or advices how to open and recover this bloody edc16c2

    First open this ecu..
    And then you will see gray frame.
    Heat up ecu..
    And then reserve via a thin ecu on gray frame slowly.
    Genuine 'WinOLS,MagPro2X17 Master, VagCom-Vcds, Vag Can Pro-Vcp'
    And 'Kess-Ktag' Red Pbc Ecu Clone User.
    Professional Car Remapper And Ecu Calibration Expert From TURKEY

  6. #5
    DK Veteran
    ivanmihov's Avatar
    Join Date
    Nov 2016
    Location
    Bulgaria
    Posts
    495
    Thanks
    116
    Thanked 238 Times in 214 Posts
    Downloads
    23
    Uploads
    0

    Default

    it''s gonna be a big nightmare

  7. #6
    Senior Member

    Join Date
    May 2017
    Location
    Turkey
    Posts
    296
    Thanks
    5
    Thanked 110 Times in 95 Posts
    Downloads
    2
    Uploads
    0

    Default

    Quote Originally Posted by ivanmihov View Post
    it''s gonna be a big nightmare
    Yes.. But dont worry bro. It is an clonable ecu. Also can do immo off
    Genuine 'WinOLS,MagPro2X17 Master, VagCom-Vcds, Vag Can Pro-Vcp'
    And 'Kess-Ktag' Red Pbc Ecu Clone User.
    Professional Car Remapper And Ecu Calibration Expert From TURKEY

  8. #7
    DK Veteran
    ivanmihov's Avatar
    Join Date
    Nov 2016
    Location
    Bulgaria
    Posts
    495
    Thanks
    116
    Thanked 238 Times in 214 Posts
    Downloads
    23
    Uploads
    0

    Default

    i managed to recover it with kess recovery function,don't know why froze on 50 %.car battery is on charger,laptop on charger,checksum is ok,my kess is the problem,which tool is better to use to write this ecu i have galleto v54 and mpps v16 for obd writing

  9. #8
    Senior Member

    Join Date
    May 2017
    Location
    Turkey
    Posts
    296
    Thanks
    5
    Thanked 110 Times in 95 Posts
    Downloads
    2
    Uploads
    0

    Default

    Quote Originally Posted by ivanmihov View Post
    i managed to recover it with kess recovery function,don't know why froze on 50 %.car battery is on charger,laptop on charger,checksum is ok,my kess is the problem,which tool is better to use to write this ecu i have galleto v54 and mpps v16 for obd writing
    Kess better... But i think youre using clone
    Genuine 'WinOLS,MagPro2X17 Master, VagCom-Vcds, Vag Can Pro-Vcp'
    And 'Kess-Ktag' Red Pbc Ecu Clone User.
    Professional Car Remapper And Ecu Calibration Expert From TURKEY

  10. The Following User Says Thank You to ilkertdi For This Useful Post:

    ivanmihov (8th August, 2018)

  11. #9
    DK Veteran
    sdtsedat's Avatar
    Join Date
    Jan 2015
    Location
    Belgium
    Posts
    1,660
    Thanks
    201
    Thanked 846 Times in 590 Posts
    Downloads
    6
    Uploads
    0

    Default

    If you use clone tools, you can better do bmw and mercedes with fgtech, is more stable.

    I brick 4 - 5 times this type of ecu with clone kess and recover with fgtech (just write without ecu data).

    & one more thing, edc16c2 is very easy to open, i think you mean edc16c31.

    This last type ecu, you need flip pcb to become bdm pads.

    Good luck!
    Regards,

    Verstuurd vanaf mijn SM-G955F met Tapatalk
    ​Original Kess V2 + CMD + Autotuner + Winols + ECM geniune owner

    With Kind Regards,

    Don't forget hit thank button if i helped.

    Sedat Garip
    Chiptuning Remapping, file service, stage 1 & 2
    Diesel + petrol
    Belgium

  12. The Following User Says Thank You to sdtsedat For This Useful Post:

    ivanmihov (8th August, 2018)

  13. #10
    DK Veteran

    Join Date
    Feb 2010
    Location
    Bosna
    Posts
    461
    Thanks
    99
    Thanked 142 Times in 108 Posts
    Downloads
    115
    Uploads
    0

    Default

    Yes edc16c2 is not problem to open, edc16c31 is another story, do not touch this ecu, best way is to cut hole with dremel on position where there are bdm pads.
    Good luck.

  14. The Following User Says Thank You to mvekaz For This Useful Post:

    ivanmihov (8th August, 2018)

  15. #11
    DK Veteran
    ivanmihov's Avatar
    Join Date
    Nov 2016
    Location
    Bulgaria
    Posts
    495
    Thanks
    116
    Thanked 238 Times in 214 Posts
    Downloads
    23
    Uploads
    0

    Default

    indeed this one is edc16c2 very easy to open,so the hard one is edc16c31 i will fight with him some day,anyway mpps v16 did the job,thanks everyone for useful posts

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •