FREE EDC17 TUNİNG SERVİCE

[p38]

pleas pm for pasword

no pro, done on a percentage of nothing converted. 8% fuel, 5% turbo 18% torque. turbo limit not moved.
something there is probably better because it is fueled but not so expensive
The SOI has not been touched, the fuel pressure is not moved
file made in 5min

[morgano]

no pro, done on a percentage of nothing converted. 8% fuel, 5% turbo 18% torque. turbo limit not moved.
something there is probably better because it is fueled but not so expensive
The SOI has not been touched, the fuel pressure is not moved
file made in 5min

Don't know why you with your BIG knowledge on EDC17 need to ask for a FREE tune in a forum, just to write sh1t about it afterwards. Very nice attitude. Really.

[p38]

Dear friend, I have no knowledge but they are honest in this forum they make good files. I asked them to check the file.
Why give a shit to kill FAP after 5000 km?

[morgano]

Mate, is a free file, did you really expect something different but normal stage 1 without any special editions?

[ecuworks]

we create a professional file but do not make it free

[voltechcar]

Read again what you say.... You do pro files but people send percent files, so this people never send again file for you because on this topic you send for they trash. Funny, in this month you are the best.

[ecuworks]

thanks my friend

[ilkertdi]

pleas pm for password my friend

%2 Iq via boost.
Corrected to 390nm DriverWish..( A lot of driverwish map not touched- original)
%4 more duration...
%2 IQ by maf...
%3 Turbo Pressure ? Are you serious ?
%6 Torque Limiter?????

Where is the Rail Limiters? Pressure limiters? SVTL-SVBL-SVRL ??

Really this file is so bad. My seen best bad file in this year.
I know it is %100 Ecm file. Maybe swiftec.
Please dont write this files in cars. Because you corrected driverwish to 390nm, But Torque Limiter 310 NM???????
Original is better.
If you wanna i can upload my remapped file. You can check and ' learn ' remapping...

[morgano]

%2 Iq via boost.
Corrected to 390nm DriverWish..( A lot of driverwish map not touched- original)
%4 more duration...
%2 IQ by maf...
%3 Turbo Pressure ? Are you serious ?
%6 Torque Limiter?????

Where is the Rail Limiters? Pressure limiters? SVTL-SVBL-SVRL ??

Really this file is so bad. My seen best bad file in this year.
I know it is %100 Ecm file. Maybe swiftec.
Please dont write this files in cars. Because you corrected driverwish to 390nm, But Torque Limiter 310 NM???????
Original is better.
If you wanna i can upload my remapped file. You can check and ' learn ' remapping...

This same applies to you.

https://r.tapatalk.com/shareLink?sha...1&share_type=t

Do you really need to come here first to ask for a free file to test a service just to later flame the OP?

Stamp your foot over other’s head is not the way to make you go up.

If you want to show how good you are keep doing good files for dk members, so when people asks for recommended tuner your name will be mentioned, but not this way.

Just a litlte comment, is normal behaviour demand more on driver’s wish, and limit then on torque limit. But maybe you don’t know why and that makes you throw statements like this “Because you corrected driverwish to 390nm, But Torque Limiter 310 NM???????”, and just to comment another thing, “why” means you ask for, “because” means you are answering for, so this should be “Why did you correct dw to 390...”

Try not to flame if you don’t want to be flamed too, my friend.

Regards,

[ilkertdi]

This same applies to you.

https://r.tapatalk.com/shareLink?sha...1&share_type=t

Do you really need to come here first to ask for a free file to test a service just to later flame the OP?

Stamp your foot over other’s head is not the way to make you go up.

If you want to show how good you are keep doing good files for dk members, so when people asks for recommended tuner your name will be mentioned, but not this way.

Just a litlte comment, is normal behaviour demand more on driver’s wish, and limit then on torque limit. But maybe you don’t know why and that makes you throw statements like this “Because you corrected driverwish to 390nm, But Torque Limiter 310 NM???????”, and just to comment another thing, “why” means you ask for, “because” means you are answering for, so this should be “Why did you correct dw to 390...”

Try not to flame if you don’t want to be flamed too, my friend.

Regards,

Thx morgano. Files can be bad. Normal because free...
But it is really shit!
I can remap all edc17 ecus on winols. Not need via mappack or damos.
I did wanna see files quality... I wish not to see this file
Best regards!

[morgano]

Hahaha you asked for the file

You should have guessed what would you receive with 90% probability

A file that hurt your eyes may be good for someone who can’t do it self.

Nice day.

[ecuworks]

%2 Iq via boost.
Corrected to 390nm DriverWish..( A lot of driverwish map not touched- original)
%4 more duration...
%2 IQ by maf...
%3 Turbo Pressure ? Are you serious ?
%6 Torque Limiter?????

Where is the Rail Limiters? Pressure limiters? SVTL-SVBL-SVRL ??

Really this file is so bad. My seen best bad file in this year.
I know it is %100 Ecm file. Maybe swiftec.
Please dont write this files in cars. Because you corrected driverwish to 390nm, But Torque Limiter 310 NM???????
Original is better.
If you wanna i can upload my remapped file. You can check and ' learn ' remapping...

are you going to learn how to chip first? My friend, I hear very bad things about you

[sdtsedat]

This same applies to you.

https://r.tapatalk.com/shareLink?sha...1&share_type=t

Do you really need to come here first to ask for a free file to test a service just to later flame the OP?

Stamp your foot over other’s head is not the way to make you go up.

If you want to show how good you are keep doing good files for dk members, so when people asks for recommended tuner your name will be mentioned, but not this way.

Just a litlte comment, is normal behaviour demand more on driver’s wish, and limit then on torque limit. But maybe you don’t know why and that makes you throw statements like this “Because you corrected driverwish to 390nm, But Torque Limiter 310 NM???????”, and just to comment another thing, “why” means you ask for, “because” means you are answering for, so this should be “Why did you correct dw to 390...”

Try not to flame if you don’t want to be flamed too, my friend.

Regards,

Agree with you!

[sdtsedat]

This forum is not for break people or say bad things! Ecuworks want to help people on forum, why we brick him?

I am 100% agree with Morgano. First ask free file, and then put all bad things in thread, ????

We are enemies?

Most of people here have garage and do this job for food, and if you read some bad things like this, they wan't continue with her job...

If "you" dare, post your file without password, let us see good file...

[dominik.m]

Nobody forces us to nothing on this forum!
We should do well, or at all.