EDC15V ECU Reading problem

**mrchip** · 27th February, 2019, 08:03 AM

Originally Posted by dominik.m

Here. MSA15 pinout.

thank you Dominik

**kaverosaez** · 10th May, 2020, 06:45 PM

Good Afternoon.
I am trying readind 038 906 018 GM but I can´t find information about it.
Could I read this ecu by pinout?
Thanks

**familiozo** · 10th May, 2020, 07:05 PM

Originally Posted by kaverosaez

Good Afternoon.
I am trying readind 038 906 018 GM but I can´t find information about it.
Could I read this ecu by pinout?
Thanks

018 is msa 15 with 2 plcc need programmer and hotair gun read this thread.

**oscartomas20** · 11th May, 2020, 01:40 AM

Try whit MPPs v16 is possible sometimes whit obd !

**bodzio012** · 11th May, 2020, 07:59 AM

Originally Posted by oscartomas20

Try whit MPPs v16 is possible sometimes whit obd !

MSA15 is impossible

**ZiZiTun** · 11th May, 2020, 09:03 AM

MSA15 you can not read via OBD. Just work with programmer, hot air and soldering. Most you need new eprom, just some ECUs from AUdi have old flash, which you can reprogaming. Dont forget position of H and L eprom. msa15 ecu.jpg

**kaverosaez** · 11th May, 2020, 07:25 PM

I want to read flash to remap, not eprom

thanks

**dehacko** · 11th May, 2020, 07:42 PM

flash chip read/ write only desolder my friends
use programer tl minipro 866

**kaverosaez** · 11th May, 2020, 07:52 PM

thansk you

**sonny21** · 24th March, 2021, 12:32 PM

hi guys,

can upa program m27c1001 chip(passat b5 ahu) ? and i saw some guys selling programed chip on ebay ? is ok if i order preprogramed chip and then swap them ? thx