2005 Touareg Key Copying Fault

[ponty]

Hiya. Tried to copy a 2005 tdi Touareg key today using Cn900 Mini and also KDX2 both using Cn3 chips. Both times reports success but the car says IMMOBIL ACTIVE when trying to use the key. I'm using a non Remote Key. Can anyone tell me what the issue is please?

[mustafabahar]

Only from kessy or ecu dump


Verzonden vanaf mijn iPhone met Tapatalk

[ponty]

Even only spare key?

[mustafabahar]

Yes


Verzonden vanaf mijn iPhone met Tapatalk

[ponty]

FVDI can do it?

[p1et]

FVDI can do it?

Should do it. Read pin from ECU and try program key with just pin. Touareg till 2006 year does not need CS precoded transponder.

Your copy doesnt work cause this car will never start if you copy on cn3, tpx4 etc. maybe TK60 but not sure.

[rokibar]

Should do it. Read pin from ECU and try program key with just pin. Touareg till 2006 year does not need CS precoded transponder.

Your copy doesnt work cause this car will never start if you copy on cn3, tpx4 etc. maybe TK60 but not sure.

we can clone id46 touareg at cn3 for sure. tested by me.

[lion0304]

we can clone id46 touareg at cn3 for sure. tested by me.

I clone 1 time with CN3 year ago, doesn't work. Engine start 1s and die.

Sure cut new key and try to clone. Car is Cayenne 2005.

[autochei]

did u make extra cut on the blade?

[fytfh]

did u make extra cut on the blade?

maybe no

[EMCE159]

Should do it. Read pin from ECU and try program key with just pin. Touareg till 2006 year does not need CS precoded transponder.

Your copy doesnt work cause this car will never start if you copy on cn3, tpx4 etc. maybe TK60 but not sure.

It works for sure on tpx4. But you'll get a message that battery in key is empty.

[p1et]

we can clone id46 touareg at cn3 for sure. tested by me.

It works for sure on tpx4. But you'll get a message that battery in key is empty.

Seems hit and miss. I tried by myself and not work. In 'best' situation the steering lock was unlocking with 3 seconds delay after putting the key, car started and engine stopped after 1 second.

[TERMINATOR1000]

Seems hit and miss. I tried by myself and not work. In 'best' situation the steering lock was unlocking with 3 seconds delay after putting the key, car started and engine stopped after 1 second.

ISK change after every start engine , in pcf 7946 process it's OK but not in CN3 ....

The result is simple , cloning is impossible ! Only programming ....

[sleepyrz]

not sure if this is relevant to this discussion but i happened to come across this after reading this thread




http://blog.obdii365.com/2018/10/04/...th-fvdi-clone/

[rokibar]

don't want comment whose experience but I DID COPY AT CN3 AND WORKING. at tk60 also.