4999 or 9499
4999 or 9499
kubuswujo (29th October, 2018)
i need this code to adapt new ecu in car i had new ecu and pin for new ecu i reset it its ok.
But i try to type
4999 or 9499
In immo as security code and it is not working... pin should be same in tacho and immo module as i think...
I tried several times but always wrong security code...
Can someone check?
EDIT:
I found the right PIN.
I read the PIN CODE FROM Instrument cluster using Autel via OBD. It shows:
9949.
Ok this PIN CODE works but only for Instrument cluster. But when i go into
BODY>Immobilizer>Programing>Security code>>
I always get :"Wrong security code" I must add that i do have oryginal OP-COM.
In Instrument cluster PIN 9949 OK, but in Immobiliser not ok... ;/ ;/ ;/
Is it possible that car has different PIN in immo and in Instrument cluster?
Last edited by kubuswujo; 29th October, 2018 at 11:29 PM.
>>Genuine Winols, Swiftec, Ktag, Flex, x17<<
>Diagnostic, Chiptuning, Dashbord<
I try to read PIN code from old ecu using CARPROG
ecu is ME7 6.2 but carprog shows PIN:
A3C4
Immo sync data:
33D6349A5F734C36383834307D6ABB45A3C480F05C383A55
Is it possible that PIN has Letters not numbers?
oryg ecu corsa.jpg
If i make read all it does try to read but after finish does not show anything.
Read dump also same.
"Searching unlock byte" and finish and noting new.
>>Genuine Winols, Swiftec, Ktag, Flex, x17<<
>Diagnostic, Chiptuning, Dashbord<
Could you please let us know what you want to do ?
If you want to change the dash, you need the security code from the new dash and for the old one ...
Let us know your situation and I will try to help you !
Sorry i wanted to adapt new Ecu in car.
I have old ecu and have readed Pin from it: 9949
I have Tacho from car Pin is 9949
I have new ECU that i want to adpadt its 1707
And now, there is no problem to:
reset old ecu,
reset new ecu.
write security code in tacho (obly for try if pin is ok)
But when i go into Body immobilizer and try 9949 Pin i got a wrong security code
>>Genuine Winols, Swiftec, Ktag, Flex, x17<<
>Diagnostic, Chiptuning, Dashbord<
have you tried reset by carprog?
http://www.digital-kaos.co.uk/forums...h-cannot-reset
Last edited by rafal; 4th November, 2018 at 10:36 AM.
need help
now my goal is to buy xp-005
who will help?
frappes (29th January, 2021)
Remove old chip from old ECU and replace to new ECU....
Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!
Did you know People will question all the good things they hear about you but believe all the bad without a second thought.
Note:All information given is to be used for educational purposes only and should not be taken seriously.
Here is an inside of ECU please tell me where here is EEprom?
I cannot identify EEPROM here.
Corsa d.jpg
>>Genuine Winols, Swiftec, Ktag, Flex, x17<<
>Diagnostic, Chiptuning, Dashbord<
70F3238+93C86 70F3379+93C8693C86.jpg
i use fvdi or carprog . what is ecu reference plz
Sorry I thought this was Corsa D 1.3 CDTi
.B.q.*........t.%.M:'...4....#.2. \J.i. e}...V.iن&.t.%.M:'...4....#.2. \J.i. e}...V.iن&B9994..0W0LDS6L88044147.0........B 9994..
0W0LDS6L88044147.0................................ ..KJKJ
Prited 9994
Converted: 9949 if it came from the same car live ignition on for 40min should let you go in.
Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!
Did you know People will question all the good things they hear about you but believe all the bad without a second thought.
Note:All information given is to be used for educational purposes only and should not be taken seriously.
can you help....i need pin code uploaded file is dump from instruments
Bookmarks