OPEL CORSA D PIN from TACHO

**Stopro92** · 22nd April, 2019, 08:54 PM

@dkgti - 7570

**Talleresmalaga** · 23rd April, 2019, 05:01 PM

Originally Posted by kubuswujo

Sorry i wanted to adapt new Ecu in car.

I have old ecu and have readed Pin from it: 9949
I have Tacho from car Pin is 9949
I have new ECU that i want to adpadt its 1707

And now, there is no problem to:
reset old ecu,
reset new ecu.
write security code in tacho (obly for try if pin is ok)
But when i go into Body immobilizer and try 9949 Pin i got a wrong security code

Good afternoon, why do you change your ecu?

if it is because the vehicle did not start, it could be problems with the cim module and it is not ecu problems and it continues with the error ...

You can use carprog to read old ecu and modify the new one, without having to use opcom to pair

Process:
connect old ecu to the vehicle, put the contact, read with carprog, at the top, this eeprom, enter and save the reading.

leave the screen open

disconnect the contact, change the ecu and connect the scrapping contact and write

the data of the pin and cinclonized must be cloned

start the vehicle and have a beer to our health

if you have a cloned ecus the problem persists change cim module

regards

**kcsaude** · 26th April, 2019, 01:45 PM

H iguys I need someone to help please I have a eeprom dump file from ipc corsa d 1.0 08 plate
dump file attached . Thanks!!!

**kcsaude** · 28th April, 2019, 07:59 AM

Hi guys just extract the dump file from my IPC some one please can help me find the pin code from it ... file attached,

thanks

**Stopro92** · 28th April, 2019, 10:20 AM

Bad dump

send dump tacho 35080

**kiszka** · 28th April, 2019, 12:06 PM

Originally Posted by kcsaude

Hi guys just extract the dump file from my IPC some one please can help me find the pin code from it ... file attached,

thanks

it is imperative to read the eeprom as 35080 !
you can not help a person
which does not listen to what is being said
if it is difficult for you, then find yourself another job
https://www.digital-kaos.co.uk/forum...-pin-from-dump
https://www.digital-kaos.co.uk/forum...rsa-D-Pin-Code

**Tibi1983** · 20th January, 2021, 03:16 PM

Szia.
Kérem, segítsen, szükségem lenne egy biztonsági kódra.
Opel corsa d 2007 vintage
1.3 motorkód: DTH: z13DTH1768125 Kérem

, segítsen ...

**brend** · 20th January, 2021, 03:38 PM

Without dump only good luck!

Originally Posted by Tibi1983

Hi there.
Please help I would need a security code.
Opel corsa d 2007 vintage
1.3 Engine code DTH: z13DTH1768125

Please help ...

**Tibi1983** · 20th January, 2021, 05:13 PM

Unfortunately, what you wrote a link to is invalid.

**Tibi1983** · 29th January, 2021, 06:09 PM

Itt van az olvasott fájl.
Köszönöm a segítséget.

Hello.
Please help, I need a security code.
Opel corsa d 2007 vintage
Engine Code 1.3: DTH: z13DTH1768125

Please help ...

**rafal** · 29th January, 2021, 06:29 PM

post eeprom m8................................

**Tibi1983** · 31st January, 2021, 08:30 PM

[QUOTE = rafal; 4052514] post eeprom m8 ................................ [/ QUOTE]
What does that mean?
Can't find the security code from here?

**sebage** · 31st January, 2021, 08:41 PM

This means that the Security Code is stored in eeprom.
You posted the contents of the flash ... maps.

You need to read and put here the content of eeprom something like 95320

**Tibi1983** · 1st February, 2021, 05:40 PM

[QUOTE = sebage; 4054239] Ez azt jelenti, hogy a biztonsági kódot az eeprom tárolja.
Ön közzétette a flash ... térképek tartalmát.

El kell olvasnia és ide kell raknia az eeprom tartalmát, például 95320 [/ QUOTE]

Please explain. How to read? Where is it located?

**brend** · 1st February, 2021, 07:00 PM

ENGLISH!!!

Originally Posted by Tibi1983

[QUOTE = sebage; 4054239] Ez azt jelenti, hogy a biztonsági kódot az eeprom tárolja.
Ön közzétette a flash ... térképek tartalmát.

El kell olvasnia és ide kell raknia az eeprom tartalmát, például 95320 [/ QUOTE]

Please explain. How to read? Where is it located?