The password file is usually read OBD then when bench ask select file.
Title of thread says RR Sport MY15 but you ask about evogue
Pw to read write ecu
I don't see jlr on the list to read pw
I don't want to do a mistake by reading writing this ecu.
I ordered openport 2.0 to read it correctly.
At this time i will learn how to read it without mistakes with pcmflash. Powerbox..
Otherwise
You think pcmflash can read MEDC17.9 TC1793.., for evoque diesel?
The password file is usually read OBD then when bench ask select file.
Title of thread says RR Sport MY15 but you ask about evogue
chakahafed (15th January, 2019)
With KTag from Ksuite 2.26 this Ecu possible with GPT
chakahafed (18th January, 2019)
Hi. This ECU needs to be read and written using the password. To read the password from the block it is necessary to use GPT connection. At a PCMFlasher gpt signals are realized on Arduino Write me in PM your mail. I will send the scheme of connection to the ECU and how to make gpt adapter.
Отправлено с моего iPhone используя Tapatalk
chakahafed (15th January, 2019), duckstar (4th October, 2020), ftw666 (16th November, 2021)
With PCM PowerBox no problem.
Отправлено с моего iPhone используя Tapatalk
chakahafed (15th January, 2019)
MEDC17.9 no problem with PCMFLASHER.
https://www.evc.de/en/product/bsl/sh...title=MEDC17.9
Отправлено с моего iPhone используя Tapatalk
chakahafed (15th January, 2019), teerak2uk (15th January, 2019)
Hello
Read Write ok on EDC17CP55 thanks to SWIRL for all help
my problem now is the MEDC17.9 I did conexion but i can't read the password . any on already did it with PCMFLASHER ?
Bookmarks