opel cd30 grundig & delphi pin code

[Serg1o]

this photo is from the top cover

[shooting]

test ... https://1drv.ms/u/s!An2tr1M8gwVrk2IG...Tn4G9?e=J4wgOu

You can't just add data to these radio's... 1000% incorrect

wbr

[shooting]

this photo is from the top cover

Ah ok, then very bad read, you need a good read to be unregistered.. read eeprom again

wbr

[Serg1o]

test ... https://1drv.ms/u/s!An2tr1M8gwVrk2IG...Tn4G9?e=J4wgOu

Thanks, I did exactly the same dump, based on similar ones and it works!
Security code is: Delivery State

Solved! Today I tied the radio to the car

Ah ok, then very bad read, you need a good read to be unregistered.. read eeprom again
wbr

Thanks for your help, but the eeprom dump reads 100% correctly. I checked several times. ST24C32 is read by the Omega programmer.
The dump is similar in structure to similar ones.

[shooting]

Thanks, I did exactly the same dump, based on similar ones and it works!
Security code is: Delivery State

Solved! Today I tied the radio to the car



Thanks for your help, but the eeprom dump reads 100% correctly. I checked several times. ST24C32 is read by the Omega programmer.
The dump is similar in structure to similar ones.

Pairing data was missing, 10000% bad read, maybe problem with chip,
adding data like that will only work temporary, then when it tries to add channels etc.. it will fail.
You will be back, I guarantee it... this radio is always misunderstood.
I work with these at least 5~10 times a day...

wbr

[ecuburner]

Hello, I need pin for CD30 Delphi Grundig.
Thanks in advance

[shooting]

Hello, I need pin for CD30 Delphi Grundig.
Thanks in advance

Pairing PIN is in the car's Display not the Radio



wbr


Here set to Virgin, ready for pairing:

[ecuburner]

I have extracted PIN from display, radio was virginized from member shooting and with OpCom I have paired with the display!
Job well done...

[ramboy]

With the 24c32 ory cd30.bin file, the process is ok, but the aux is gone, the aux is not working
I will be glad if you help

[shooting]

With the 24c32 ory cd30.bin file, the process is ok, but the aux is gone, the aux is not working
I will be glad if you help

This is what happens when you use other peoples dumps in your radio.... lesson learned..

Post your Original file if you kept it and we can fix it




wbr

[ramboy]

This problem arose due to reasons beyond my control.
​i can send the file like this
https://dosya.co/yquw46oteorr/24c32_...0MP33.rar.html

[shooting]

This problem arose due to reasons beyond my control.
​i can send the file like this
https://dosya.co/yquw46oteorr/24c32_...0MP33.rar.html

File is set to virgin, is this the original file to the radio?



wbr

[ramboy]

This is not a virgin file. I found it and threw it into the radio, everything was fine, but after that, the aux went

[ramboy]

I'm not doing this commercially, so I'm not very dominant, but I would be very happy if you could help.

[shooting]

This is not a virgin file. I found it and threw it into the radio, everything was fine, but after that, the aux went

It's 100% virgin, and guessing not yours, this is why we need the radio's ORIGINAL dump from it.



wbr