KOS module up on glovebox pasanger side. Tango add key (PCF7952) corretly.
KOS module up on glovebox pasanger side. Tango add key (PCF7952) corretly.
tango only program key to start car (key must be in slot), smart function not work..
You must after re-add key by obd.
There a few tried to do that. Key not acepted anymore ,prog failed. And need restore data to make chip again.
Maybe need expensive tool like zedfull etc. Because xtools lonsdors etc not work. And how that read key looks like. If only add key function possible. How read same key ,it like akl if program only one
Last edited by drugowaz; 6th November, 2018 at 04:57 PM.
Renault ECU tool / IO terminal / A.S.W
Does even tango etc. recognize dump from 2014+ ??? I bet NO
Those people think they buy crashed car without keys and that possible somebody do this for 200$
Dealer wants almost 3000$
Funny
obdstar pad can do a spare on those
Spare yes. All key lost no
All key lost yes. Done it
Sent from my Moto Z (2) using Tapatalk
fixanycar (5th March, 2019)
VVDI tango function, can be RVR, but after adding, need to move key bites in the dump, because the tool does not write it in correct location. Rest is like everyone said. I don't remember making smart function work, needed just starting at that moment .
HeXeN (5th March, 2019)
i have outlander 2016 to do smart all keys lost, cant asee function in tango ,, can anyone shed any light on updates on this situation now? thanks
like what eeprom to read, what module on tango it is, any other tools doing it ?vvdi2/
Tools owned -
AD100 PRO, Lonsdor, FVDI 18, FVDI 20, VVDI PROG, VVDI2, VVDI MB
CGDI BMW, SuperVag, Renault ECU tool, OBDstar X300 DP Plus, AUTEL im508
VVDI Mini Keytool, KeyDIY KDX2, SBB, ACDP CAS/KVM
Opcom, VCDS pro, Diagbox, Multiecuscan, Forscan, JLR SDD
try to find module location, by vin https://partsouq.com/en/catalog/genuine
should be 24c16. might be micro eeprom. vvdi2 not always recognize dump.
hi guys i am here now with 2017 L200 smart key all key lost
i found KOS box here, but cannot see noraml 24c eeprom tango photo for ASX smart kos box is different attached photos of both side board
any help? or does it need new KOS box and programming?
thanks guys
Tools owned -
AD100 PRO, Lonsdor, FVDI 18, FVDI 20, VVDI PROG, VVDI2, VVDI MB
CGDI BMW, SuperVag, Renault ECU tool, OBDstar X300 DP Plus, AUTEL im508
VVDI Mini Keytool, KeyDIY KDX2, SBB, ACDP CAS/KVM
Opcom, VCDS pro, Diagbox, Multiecuscan, Forscan, JLR SDD
its very small eeprom
sdnatlst (7th July, 2020)
Bookmarks