Hello, Cas3+ means encrypted ISN so you need the working key ISN or you must read the ISN from DME
So try to read ISN fr4om DME using FVDI, or use a tool to read working key ISN
I use in my Shop XEP100 and original DK3
Hello i have Xprog to read/write CAS3+ and hitag2/ FVDI key tool for the remote.
I get the remote working but not unlocking dashboard/ not starting car. ( The original key still starts the car just want to add another key )
So i think im missing the unencrypting software part ... So apart from spending a fortune on BMW-Explorer what options do i have ?
Tango Clone OEM 1.11 = 150- 175e software would work for the un-encrypting part on cas3+ ista 45 ?
Maybe Xhorse VVDI Key tool includes software to unencrypt cas3+ ?? about 200e
Maybe Xhorse VVDI-Prog includes software to do unencrypt cas3+ ? ? => 400e ?? or its only a programmer for chips?
TMpro2 basic hw+sw + BMW software module 131 = 200+400 => 600e
Xhorse BMW Multitool +Cas3 adapter= 770e
Original Tango => 1200e
Hello, Cas3+ means encrypted ISN so you need the working key ISN or you must read the ISN from DME
So try to read ISN fr4om DME using FVDI, or use a tool to read working key ISN
I use in my Shop XEP100 and original DK3
Bookmarks