buenas por qe no hay escrives y lees por BDM es lo mejor y seguro ,
Hello.have a problem with this ecu.i cab read but i can't write back a modified content.like a write protection.
But this ecu is edc16c34. 0281015607
It's true that ecu was from 2010 year.It is here some trick to write the ecu?A boot pin?Can somebody help me?
Thanks.Here is some photo from this ecu.20151008222023.jpg20151008222009.jpg
buenas por qe no hay escrives y lees por BDM es lo mejor y seguro ,
Juanluis,please repost in English !
Aaahh ! I love the smell of Eeprom in the morning...
" We'll come in low out of the rising sun, and about a mile out, we'll put on the music . . . "
protection !! friend is a normal edc16! check connections !!
..Ecu Repair ... Steering Wheel Repair ... Dash Repair ... AirBag Repair .... that Bad LiFe ...
but here is an other type of mcu.not mpc56.
There is sc66703 from freescale.So nobody have this problem.The bdm read write not possible.With bdm100 this type of cpu is not supported.Cannot read write flash.
From obd2 i can read the content, but can't write back anything modified content.Only the original.Write stops at 84% with an error, where is the modification.
So nobody have this type of issue?
It is BDM only, you can read OBD but cannot write on a 2010.
Genuine BDM needed. clone not work.
Pro VAG Petrol Tuning | Pro DPF Removal | MED17 TPRot Removal
Try Ktag!!!
bobolin4o (9th October, 2015)
Ok.So i'll try it.But have only v54 or kessV2.Hope i can do with this tools.
BDM = fgtech
kess is only for obd-boot
you can disable the immo and you can write with direct connection . to write this ecu u need the immo on car .
Tuning Cars and Trucks, Immo off , DTC delete, DPF off
i do this ecu always with fgtech in bdm, i wrote edc16c34 psa and ford also by obd without problem always with fgtech...is not necessary disable immo or make other actions, only read and write obd or bdm...obviously with upgraded tool is better!
Hello.
Have someone full BDM reading from this 9CWF ecu ?
I need also for 9CWE ... if have someone...
You can read write BDM with no problem
If your BDM100 is clone or tool old you can read write also but no way to read FLASH/EEP/MPC
Only can read FULL BDM and write also.
You Know it because when BDM load it says ecu not recognized, choose from the list.
You can do a trick fro simply write flash.....As you Know in advanced menu when you read FULL BDM you can "cut " full bdm file into its 3 different files. Of course you can also join it.
This way you can write many ecus not recognized by BDM but perfectly writen.
But sure Gallv54 can write without any problem with all recognised ok.
i have good tool for write.
I need only have data to write.
Have someone bdm reading ?
Bookmarks