Program Peugeot remote key to citroen xsara picasso

[ottife]

Hi Gents, I lost my xsara picasso transponder when replace the key shell, but keep the remote board on hand. I go to bought a brand new remote key of Peugeot for there is no xsara key for selling, I disassembled and found the chipset is same (75078020).
My question is can the Peugeot key be used with my Picasso?
Thanks a lot!

[godfathertre]

pay a locksmith as you do not have the tools and knowledge to program another key i see this often as people keep and swapping key shells for flip keys and they do not know

what are doing losing transponders or breaking the glass transponders.

[ottife]

pay a locksmith as you do not have the tools and knowledge to program another key i see this often as people keep and swapping key shells for flip keys and they do not know

what are doing losing transponders or breaking the glass transponders.

Yes. I spent whole day on Internet on seeking Forums to find relate knowledge after lost the transponder , and asked many questions to forums and friends, really not worth it .

[Zmann]

Hi Gents, I lost my xsara picasso transponder when replace the key shell, but keep the remote board on hand. I go to bought a brand new remote key of Peugeot for there is no xsara key for selling, I disassembled and found the chipset is same (75078020).
My question is can the Peugeot key be used with my Picasso?
Thanks a lot!

You say like when you broke a 93c46 eeprom while soldering then found one exact same chip from your scrap board, "can I use it as a replacement?"

[ottife]

You say like when you broke a 93c46 eeprom while soldering then found one exact same chip from your scrap board, "can I use it as a replacement?"

I paired the key with car today, it works, just need to choose correct remote type in Lexia.

[RFRemotes]

I paired the key with car today, it works, just need to choose correct remote type in Lexia.

NO, it is far away from that. Your new PCF7936 will never enable the remote pcb. PCF and PCB are paired in factory. ID of remote is written also in PCF. This way when you learn transponder to car the BSI knows your remote ID and accepts it. Any attempts other than paired PCF<->PCB will fail.

[ottife]

NO, it is far away from that. Your new PCF7936 will never enable the remote pcb. PCF and PCB are paired in factory. ID of remote is written also in PCF. This way when you learn transponder to car the BSI knows your remote ID and accepts it. Any attempts other than paired PCF<->PCB will fail.

Yes. this key is a brand new for 206 I bought from Peugeot, I worried about it can not work on my car Citroen Xsara Picasso, but it works after be paired with Lexia.

[Zmann]

I paired the key with car today, it works, just need to choose correct remote type in Lexia.

Yes, it's possible. That was a bit different or I was misunderstanding that you were just swap the chip.

Fortunately that you're working on Citroen which the BSI software is plenty of remote choices, so you unselected 07CA and select 0C7A ?

[jodge]

Yes. this key is a brand new for 206 I bought from Peugeot, I worried about it can not work on my car Citroen Xsara Picasso, but it works after be paired with Lexia.

no way

those are 206 remote part numbers

1) 1 button remote for models without alarm up to 2001 part 6552ZW
2) 2 button remote for models with alarm up to 2001 part No 6552ZX
3) 2 button remote for models 2002 to 2005 with no front fogs part number 6554YL
4) 2 button remote for models 2002 to 2005 with front fogs part No 6554YR
5) 2 button remote for models 2005 to end of production with no front fogs , part number 6554YQ
6) 2 button remote for models 2005 to end of production with front fogs , part number 6554YV

and this is xsra picasso:
6554RF

[RFRemotes]

Yes. this key is a brand new for 206 I bought from Peugeot, I worried about it can not work on my car Citroen Xsara Picasso, but it works after be paired with Lexia.

Well done! That means Xsara BSI will accept all types of remote from this generation, good to know this. Can you please confirm what choice you selected to make it working? I mean type C7/1C/DB/B8 as configuration in Lexia.

[Zmann]

These are just two types out of 8 on C3. I believe Xsara would be similar

C3 remote choices.JPG

[ottife]

These are just two types out of 8 on C3. I believe Xsara would be similar

C3 remote choices.JPG

WechatIMG11.jpgWechatIMG22.jpgWechatIMG33.jpgHere is the key I purchased from a local PSA dealer, no label, no model code, but there is Lion logo on it, the guy said it is for old model 206 but should work with Picasso also, it cost appr USD$40, but if pair by dealer you need to pay another $50. I found a local locksmith, spent only$15 to achieve it, the locksmith use 3~4 tools and at last it works, he told me need to adjust the remote type.

[Zmann]

"to adjust the remote type" should refer to change remote type in the image I posted. The codes mentioned or in the image cannot be physically seen anywhere on the keys but need some tool to read them !

[ottife]

"to adjust the remote type" should refer to change remote type in the image I posted. The codes mentioned or in the image cannot be physically seen anywhere on the keys but need some tool to read them !

Thanks for your clarify.

I watched it seems a window of "xxxx parameters", and tens of items can be configured, the value is one or two number can be edit.

[mahmoud10th]

When I used Base Conversion app I got this hex [2CAC]

DEC: 14075466820780
BIN: 00 1100 1100 1101 0011 0011 0011 0011 0010 1100 1010 1100
OCT: 314646314626254
HEX: CCD33332CAC

Other app I got this hex [CB2B]

DEC: 219929168683
BIN: 11 0011 0011 0100 1100 1100 1100 1011 0010 1011
OCT: 3146463145453
HEX: 3334CCCB2B

Which one should I use as remote type ?
My car is 2001 Xsara||
Thank you for guidance

Sent from my Moto E (4) Plus using Tapatalk