thanks to brobble for solution, do same by myself and everything fine!
thanks to brobble for solution, do same by myself and everything fine!
thank You for Help
Hello to all,
I have this ECU with original EEPROM corrupted P0601 checksum error and the car does not start with another EEPROM and after make it immo off the car is working ok, but the customer want the car like before.
So if it's possible to fix the original file if this is impossible the only way is to change VIN to the second file make it IMMO OFF.
Regards.
Your eeprom (original corrupted) has no deathbyte. You can try this file, itīs a test. Post result.
Greets MR...
a-falcon (21st October, 2020), DiagExpert (8th August, 2020)
the car is starting with original EEPROM now thank you brobble !!!
i have a passat 1.6 fsi. my car fault code p0601. can you help me
hi can someone help me with this eeprom?
hallo friends. the same fault can u help me repair eeprom too
https://drive.google.com/file/d/19Sy...ew?usp=sharing EEPROM
Last edited by marcinszczurus; 8th April, 2021 at 09:23 AM.
Hi
Possible to check my EEPROM to see if it is corrupted Because I can not clear the faults P1633 P1669 P0322 P1914
Bosch 0261S02008 VW 03C906056B
Thanks
Hello!
Could someone fix the checksum for this eeprom file? m95080 (p0601)
Here is your file.
Greets MR...
Last edited by brobble; 7th May, 2021 at 06:46 PM.
serikpay (28th November, 2023), Vitalik1983 (11th May, 2021)
I have a similar problem
Please help with this `bin`
P0601
MED9.5.10
03C906056B
03c906056b_eeprom_95080.rar
Last edited by xelos; 19th May, 2021 at 05:38 AM.
Test and report
Can please calculate chk on thia fail?
Passat b6 med 9.5.10. 06f906056am.
P0601 CS error.
Thanks!
Bookmarks